Motorola Solutions Inc. 89FT5864 사용자 설명서

This feature allows your radio to work like a pager. 

Even if other users are away from their radios, or if they are 
unable to hear their radios, you can send them an individual 
Call Alert page. You can also verify if a radio is active on the 
system.

Depending on how your radio is programmed, when you make 
an Enhanced Private Call, the radio either automatically sends 
a call alert page if there is no answer after the maximum ring 
time, OR when you press the PTT button. 

This feature must be preprogrammed by a qualified 
radio technician.

When you receive a Call Alert page, you hear four repeating 
alert tones and the LED blinks green. 

The call received icons blinks and the display shows Page 
received.

Press any button to clear the Call Alert page. See Making a 
Talkgroup Call on page 42 or Making a Private Call 
(Trunking Only) on page 42 for more information on returning 
the call.

The radio automatically exits the feature, if the feature 
inactivity timer is enabled, when the radio is left idle 
and the timer expires. You will hear the Menu Inactive 
Exit Tone upon feature exit.

Procedure:
Press the preprogrammed Quick Access (One-Touch) Call 
Alert Paging button to send a page to the preprogrammed ID 
and proceed to Step 5. 
OR
Follow the procedure below. 

<

 or 

>

 to Page.

Press the Menu Select button directly below Page.

Press Cnts to scroll through and select the required ID.
OR

U

 or 

D

 to the required ID.

OR
Use the keypad to enter the required ID.

Press the PTT button to send the page.

The display shows Paging... <Number>.

If the call alert page is sent successfully, you hear a tone 
and the display shows Ack received.
OR