High-Flying Electronics Technology Co. Ltd HF-A11X 사용자 설명서
HF-A11x V3.1 User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
48
mask: WAN port subnet mask;
gateway: WAN port gateway address;
gateway: WAN port gateway address;
This Instruction only effective for HF-A11x works as STA. After HF-A11x module boots up again,
the setting will be effective. But user can set this command when module configured as AP.
the setting will be effective. But user can set this command when module configured as AP.
4.2.2.21. AT+ LANN
Function: Set/Query LAN setting, only effective as AP mode;
Format:
Format:
Query
Operation
AT+LANN<CR>
+ok=<address,mask ><CR>< LF ><CR>< LF >
Set
Operation
AT+ LANN=<address,mask ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
address: LAN port IP address;
mask: LAN port subnet mask;
mask: LAN port subnet mask;
This Instruction only effective for HF-A11x works as AP. After HF-A11x module boots up again,
the setting will be effective. But user can set this command when module configured as STA.
the setting will be effective. But user can set this command when module configured as STA.
4.2.2.22. AT+ DHCPGW
Function: Set/Query DHCP gateway address;
Format:
Format:
Query
Operation
AT+ DHCPGW<CR>
+ok=<address><CR>< LF ><CR>< LF >
Set
Operation
AT+ DHCPGW=<address ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
address: DHCP gate address;
4.2.2.23. AT+ TCPTO
Function: Set/Query TCP timeout;
Format:
Format:
Query
Operation
AT+ TCPTO<CR>
+ok=<time><CR>< LF ><CR>< LF >
Set
Operation
AT+ TCPTO=<time ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
time: TCP timeout time.
<= 600, (600s);
>=0, (0 means no timeout);
Default,
>=0, (0 means no timeout);
Default,
300s;
4.2.2.24. AT+ MAXSK
Function: Set/Query maxima TCP connection;
Format:
Format:
Query
Operation
AT+ MAXSK<CR>
+ok=<num><CR>< LF ><CR>< LF >
Set
Operation