Brother Industries Ltd. 5V6103 사용자 설명서
Getting Started
8
Charging
Use the AC adapter designed specifically for this printer to
charge the battery.
After purchasing this printer, be sure to charge the battery fully
before using it.
charge the battery.
After purchasing this printer, be sure to charge the battery fully
before using it.
1
Plug the AC adapter
cable into the printer.
cable into the printer.
2
Plug the AC adapter plug
into a household electrical
outlet (AC 110 V
into a household electrical
outlet (AC 110 V
-
120 V).
Charging of the lithium ion
battery automatically begins.
battery automatically begins.
→
The orange charging
LED is lit.
LED is lit.
→
When charging is finished, the charging
LED goes off.
LED goes off.
3
After charging is finished, disconnect the AC adapter.
y
It takes approximately three hours for the battery
to be recharged from completely empty to fully
charged (with the printer turned off).
to be recharged from completely empty to fully
charged (with the printer turned off).
y
Recharge the battery in an environment with a
temperature between 5 °C and 40 °C. (The bat-
tery will not recharge if the ambient temperature
is outside of this range.)
temperature between 5 °C and 40 °C. (The bat-
tery will not recharge if the ambient temperature
is outside of this range.)
The MW-145BT cannot be operated solely with the AC
adapter. The rechargeable battery must be installed.
adapter. The rechargeable battery must be installed.