Brother Industries Ltd. 8CAG19 사용자 설명서

Chapter B

When you transport the machine, use the 
packing materials that came with your 
machine. If you do not pack the machine 
properly, you could void your warranty.

 

It is important to allow the machine to ‘park’ 
the print head after a print job. Listen 
carefully to the machine before unplugging 
it to make sure that all mechanical noise 
has stopped. Not allowing the machine to 
finish this parking process may lead to print 
problems and possible damage to the print 
head.

 

a

Open the ink cartridge cover.

b

Press the ink release lever to release 
the ink cartridge and take out the ink 
cartridges. (See Replacing the ink cartridges on page 156.)

c

Install the -green protective part and 
then close the ink cartridge cover.

 

 

Make sure that the plastic tabs on both 
sides of the green protective part (1) have 
securely clicked into place (2).

 

 

If you are not able to find the green 
protective part, DO NOT remove the ink 
cartridges before shipping. It is essential 
that the machine be shipped with either the 
green protective part or the ink cartridges in 
position. Shipping without them will cause 
damage to your machine and may void your 
warranty.

 

d

Unplug the machine from the telephone 
wall jack and take the telephone line 
cord out of the machine.

e

Unplug the machine from the AC power 
outlet.

f

Using both hands, use the plastic tabs 
on both sides of the machine to lift the 
scanner cover until it locks securely into 
the open position. Then unplug the 
interface cable from the machine, if it is 
connected.

g

Lift the scanner cover (1) to release the 
lock. Gently push the scanner cover 
support down (2) and close the scanner 
cover (3).

 

 

Be careful not to trap your fingers under the 
scanner cover.