UTC Fire & Security Americas Corporation Inc 861-HTTP 사용자 설명서
1
,QVWDOODWLRQ,QVWUXFWLRQV
ZZZ*(6HFXULW\FRP
*(6HFXULW\
'
1
2
3
6
9
8
5
4
7
ST
0
BY
OFF
STAY
AWAY
NO DELAY
CHIME
STATUS
BYPASS
COMMAND
8341G01A.DS4
Product
Summary
Summary
The HiTech Handheld Wireless Touchpad is a lightweight, portable touchpad that lets you con-
trol compatible security systems (see “Specifications”).
trol compatible security systems (see “Specifications”).
The touchpad lets you arm/disarm the system, bypass sensors, control lights, activate emergency
alarms, and check the systems status.
alarms, and check the systems status.
The touchpad features include the following:
•
Automatic low battery reports to the panel
•
Red/Green indicator light that responds differently to regular keypresses and panic button
keypresses
keypresses
•
Police, Fire, and Auxiliary panic buttons
•
Automatic supervisory reports to the panel every 64 minutes
•
Long life (5–8 years) 3 VDC lithium battery
•
Wall-mounting option
Installation
Installation Guidelines
Observe the following guidelines when using and mounting the touchpad:
•
Refer to the appropriate installation instructions for guidelines on typical range for using this
and other wireless devices.
and other wireless devices.
•
Avoid moist areas.
•
Avoid excessive metal or electrical wiring, including furnace and utility rooms.
•
Avoid exceeding the touchpad’s operating temperature limits of 10° to 120°F (-12° to 49°C)
Note
If the touchpad is wall mounted or always kept at the installation site, set upper sensor number 89 to
ON. If the touchpad will occasionally be removed from the site (i.e. kept in an automobile), set upper
sensor number 89 to OFF.
ON. If the touchpad will occasionally be removed from the site (i.e. kept in an automobile), set upper
sensor number 89 to OFF.
Installing the Battery
¾
To install the battery:
Follow the diagrams in Figure 1.
'RFXPHQW1XPEHU5HY&
)HEUXDU\
+L7HFK+DQGKHOG:LUHOHVV
7RXFKSDG
Model No. 60-597