Becker Avionics GmbH AR6203 사용자 설명서
Operating Instructions
Frequency Selection Modes
0638.420-071 Issue 03 July 2015
VHF Transceiver Family 620X
17
Note:
•
The changes become active immediately
•
Changing the active frequency is possible only when the
transceiver is not transmitting.
Press the "STO" key to store the active frequency into the next vacant
memory place of the user channels database.
2.5.3.
Channel Mode
The channel mode shows data from User Channels Database (indicated by
"CH"), or Last Channels Database (indicated by "LAST") and shows if
applied a customized label (identifier) for the channels
(max. 10 characters).
The channel database provides storage of:
The channel database provides storage of:
•
CH01 to CH99 and
•
LAST 1 to LAST 9.
Note
The functions "LAST" and Store/Restore are only
available if these options are activated in
"Configuration Settings" - "MEM OPTIONS".
Note:
If the device is operating in the 25 kHz mode a
selection of an earlier stored 8.33 kHz channel is not
possible. For selection of 8.33 kHz channels, the
device must operate in 8.33 + 25 kHz mixed mode.
Press the "MDE" key the channel mode page appears.
By means of channel number stored frequencies can be selected. The top
By means of channel number stored frequencies can be selected. The top
line shows the corresponding frequency and the bottom line the channel
number and customized label (identifier).
If the active frequency has no assigned channel number the indication is
If the active frequency has no assigned channel number the indication is
"CH--".
IC
SQL
SQL
125.875
CH
TWR EDSB
01
IC
SQL
SQL
125.875
LAST
TWR EDSB
1