HP 5185-3843 사용자 설명서
1-10 Introduction
By factory default, WEP encryption keys are not set on the HP Jetdirect print server. The
print server supports configuration of either 40/64-bit or 104/128-bit encryption keys.
In addition, up to four WEP encryption keys can be configured, although only one can be
selected for transmission at a time.
print server supports configuration of either 40/64-bit or 104/128-bit encryption keys.
In addition, up to four WEP encryption keys can be configured, although only one can be
selected for transmission at a time.
For typical networks, WEP keys are considered static because they remain the same unless
manually reconfigured. For example, on a typical infrastructure mode network that uses
WEP encryption, a change to the WEP key on an access point will require a manual change
to the WEP key on each wireless device. However, on highly-secure advanced networks
that use authentication servers for network access, the WEP keys used may be dynamic,
because they are routinely changed automatically, making them difficult to decipher.
manually reconfigured. For example, on a typical infrastructure mode network that uses
WEP encryption, a change to the WEP key on an access point will require a manual change
to the WEP key on each wireless device. However, on highly-secure advanced networks
that use authentication servers for network access, the WEP keys used may be dynamic,
because they are routinely changed automatically, making them difficult to decipher.
Note
Wireless performance is reduced when WEP encryption is enabled, due to the
additional processing time required.
additional processing time required.
Network Printing Terms and Concepts
Client-Server Printing
On a client-server network, client computers send print jobs to a dedicated network server
that controls the use of each installed printer. The HP Jetdirect print server receives print
jobs over the network under the network server’s control, or can automatically monitor
print queues and de-spool print jobs from the network server.
that controls the use of each installed printer. The HP Jetdirect print server receives print
jobs over the network under the network server’s control, or can automatically monitor
print queues and de-spool print jobs from the network server.