Lifeline Systems Inc. 7100MHB 사용자 설명서
48
Questions? Call 1-800-635-6156
Symbols
Symbol
Description
Symbol for DC (Direct Current) Power.
Polarity symbol. Indicates that the center (tip) of the output plug is
Positive (+) and the barrel of the output plug is Negative (-).
Positive (+) and the barrel of the output plug is Negative (-).
The power supply efficiency performance is Level 5, indicating a high
standard in use efficiencies and no-load power consumption.
standard in use efficiencies and no-load power consumption.
The CE Mark is a conformity symbol for European countries. The
symbol stands for Conformité Européenne.
symbol stands for Conformité Européenne.
A Class II or double insulated electrical device. This is one which
has been designed in such a way that it does not require a safety
connection to electrical earth (ground).
has been designed in such a way that it does not require a safety
connection to electrical earth (ground).
The TÜV logo is a certification mark of TÜV Rheinland, a Nationally
Recognized Testing Laboratory (NRTL). The “C” on the left of the
mark denotes compliance in Canada and the “US” on the right
indicating compliance for the US.
Recognized Testing Laboratory (NRTL). The “C” on the left of the
mark denotes compliance in Canada and the “US” on the right
indicating compliance for the US.
The symbol for WEEE — Waste Electrical and Electronic Equipment.
This symbol indicates that when the end-user wishes to discard this
product, it must be sent to separate collection facilities for recovery
and recycling. Note: Please return the HomeSafe/GoSafe devices
to Philips Lifeline or your Philips Lifeline representative for proper
disposal.
This symbol indicates that when the end-user wishes to discard this
product, it must be sent to separate collection facilities for recovery
and recycling. Note: Please return the HomeSafe/GoSafe devices
to Philips Lifeline or your Philips Lifeline representative for proper
disposal.
The ETL Listed Mark – demonstrates compliance to the
requirements of widely accepted product safety standards, as
determined through independent testing and periodic follow-up
inspections by a Nationally Recognized Testing Laboratory (NRTL).
The “C” on the left of the mark denotes compliance in Canada and
the “US” on the right indicating compliance for the US.
requirements of widely accepted product safety standards, as
determined through independent testing and periodic follow-up
inspections by a Nationally Recognized Testing Laboratory (NRTL).
The “C” on the left of the mark denotes compliance in Canada and
the “US” on the right indicating compliance for the US.
Per EN 60529. The IP27 rating indicates (2)protection against fingers
or other object not greater than 12mm in diameter and (7) Ingress of
water in harmful quantity shall not be possible when the enclosure
is immersed in water up to 1 meter of submersion for up to 30
minutes.
or other object not greater than 12mm in diameter and (7) Ingress of
water in harmful quantity shall not be possible when the enclosure
is immersed in water up to 1 meter of submersion for up to 30
minutes.
Type BF Applied Part
dra
ft
Confidential Draft for Agency Submission Only.
Not for Posting on any Public-Facing Website
Not for dissemination to the public without the express written consent of Philips.