Mitsubishi Electric Corp 485 사용자 설명서
Caution and Care
CONDENSATION IS THE ENEMY OF VIDEO RECORDERS
WHAT IS CONDENSATION?
1. When a very cold drink is poured into a glass, the water droplets which form on the outer surface of the glass are an example of
condensation.
2. If the VCR is exposed to a rapid increase in temperature (such as warming a cold room or transporting it from a cold location to a
warm one) condensation may form on the tape transport mechanism inside the VCR. By heating the inside of the VCR, it can dry
up the moisture and prevent damage to the VCR or video tape from condensation. To do this, plug the VCR in and switch the VCR
POWER to ON. Leave the VCR on for at least two hours before using it for recording or playback.
up the moisture and prevent damage to the VCR or video tape from condensation. To do this, plug the VCR in and switch the VCR
POWER to ON. Leave the VCR on for at least two hours before using it for recording or playback.
CONDENSATION IS LIKELY TO OCCUR WHEN:
1. The VCR is moved inside from outdoors or from a cold room to a warm one.
2. A cold room is heated quickly.
3. Humidity is high.
2. A cold room is heated quickly.
3. Humidity is high.
Note
•
Avoid using the VCR where cold air (e.g., from an air conditioner) will blow directly on it.
Never place anything containing water on top of the VCR (e.g., vases, cups, etc.)
Heavy object (e.g., TV) should never be placed on the VCR
NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE VCR
Touching the inside of the cabinet or inserting foreign objects of any kind not only creates a safety hazard but can also cause extensive
damage.
Touching the inside of the cabinet or inserting foreign objects of any kind not only creates a safety hazard but can also cause extensive
damage.
PROTECT THE POWER CORD
Damage to the power cord may cause fire or shock hazard. When unplugged, hold by the plug only and pull out carefully.
Damage to the power cord may cause fire or shock hazard. When unplugged, hold by the plug only and pull out carefully.
UNPLUG THE POWER CORD DURING A LONG ABSENCE
Turn off the power and unplug the power cord during a long absence.
Turn off the power and unplug the power cord during a long absence.
MAINTAIN GOOD VENTILATION
Do not obstruct the ventilation holes on the VCR. For maximum ventilation, place the unit on a hard level surface only, and ensure it is
not covered during use.
Do not obstruct the ventilation holes on the VCR. For maximum ventilation, place the unit on a hard level surface only, and ensure it is
not covered during use.
WHEN NOT IN USE
When you finish operating the VCR, always unload the cassette and turn OFF the VCR POWER.
When you finish operating the VCR, always unload the cassette and turn OFF the VCR POWER.
CABINET CARE
Never use petroleum-based cleaners. Clean with a soft cloth moistened with soap and water and wipe dry. PVC cables or leads should
not be left in contact with the cabinet surface for long periods.
Never use petroleum-based cleaners. Clean with a soft cloth moistened with soap and water and wipe dry. PVC cables or leads should
not be left in contact with the cabinet surface for long periods.
INSTALLATION LOCATION
For excellent performance and lasting reliability, install in a location that is:
1. Well ventilated, out of direct sunlight and away from direct heat.
2. A solid, vibration-free surface.
3. Free from high humidity, excessive dust and away from magnetic fields.
For excellent performance and lasting reliability, install in a location that is:
1. Well ventilated, out of direct sunlight and away from direct heat.
2. A solid, vibration-free surface.
3. Free from high humidity, excessive dust and away from magnetic fields.
Note
Never move the VCR without first removing the tape.
CARE OF THE VIDEO CASSETTE TAPES
•
•
Avoid vibration or shock.
•
Do not place near a strong magnetic field (e.g., a motor, transformer or magnet).
•
Never place or store in direct sunlight.
•
Avoid dusty places.
•
Place the cassette in its case and store vertically.
•
Never store tape in high humidity.
v
Reference page
WARNING:
The included power cord is used for 120 V, 60 Hz.
Never connect any outlet or power supply having a different voltage or frequency.
The included power cord is used for 120 V, 60 Hz.
Never connect any outlet or power supply having a different voltage or frequency.