Mitsubishi Electric Corp HS-U776 사용자 설명서
49
RF converter
If your TV has audio and video inputs, turn the RF converter OFF. If your TV
does not have audio and video inputs, keep the RF converter set to ON. It is
preset by the factory to ON.
does not have audio and video inputs, keep the RF converter set to ON. It is
preset by the factory to ON.
3
Complete steps 1 and 2 on the previous page. Customize choices menu
appears. Use the ADJUST buttons to select RF converter. Press ENTER
to select ON or OFF.
appears. Use the ADJUST buttons to select RF converter. Press ENTER
to select ON or OFF.
4
Press MENU twice to turn off the menus.
IMPORTANT
IMPORTANT
If the RF converter is set to ON, you aren’t required to press VCR/TV to
play a tape or to use VCR menus. The VCR light will automatically light up
when you press PLAY or MENU. Be sure to set the TV to the video
channel (See page 10).
play a tape or to use VCR menus. The VCR light will automatically light up
when you press PLAY or MENU. Be sure to set the TV to the video
channel (See page 10).
PerfecTape
®
PerfecTape
®
is an exclusive Mitsubishi feature that tests the quality of video
tapes you will record on. After each test, the VCR will adjust its internal
circuitry in order to make the best possible recording on your tape.
circuitry in order to make the best possible recording on your tape.
setting up PerfecTape
®
You can set up PerfecTape
®
to function two ways.
If you want the VCR to automatically test any non-recorded tapes when the
tape is loaded, select AUTO.
tape is loaded, select AUTO.
If you do not want the VCR to automatically test tapes, select MANUAL.
PerfecTape
PerfecTape
®
will now function only when you start a test. Any tape with the
erasure prevention tab intact can be manually tested.
It will not automatically test recorded tapes – you must choose to test those
yourself.
yourself.
3
Complete steps 1 and 2 on the previous page. Customize choices menu
appears. Use the ADJUST buttons to select PerfecTape.
appears. Use the ADJUST buttons to select PerfecTape.
4
Press ENTER to set PerfecTape to AUTO or MANUAL.
5
Press MENU twice to turn off the menus.
using PerfecTape
®
automatically
1
Load a tape that has not been recorded into the VCR.
The VCR will display the testing status screen. When testing, the VCR records
for one second, then evaluates the recording it made. The entire test takes
about 8 seconds. During this time, the PT light on the front panel will flash. If
you wish to cancel the test, press STOP on the remote while the PT light is
still flashing.
for one second, then evaluates the recording it made. The entire test takes
about 8 seconds. During this time, the PT light on the front panel will flash. If
you wish to cancel the test, press STOP on the remote while the PT light is
still flashing.
When the test is done, the VCR will display the rating of your tape for 8
seconds. On the front panel, the PT light will shine steadily, indicating that the
VCR has set its internal circuitry to make the best possible recording on this
tape.
seconds. On the front panel, the PT light will shine steadily, indicating that the
VCR has set its internal circuitry to make the best possible recording on this
tape.
Advanced Features
√Customize choices
ƒVideo mute (ON )
ƒAuto power save (OFF)
ƒRF converter (ON )
ƒPerfecTape
(AUTO)
Go to next page §
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to change
∑ ππADJUST to select
PerfecTape SP
Band S-ET record ON
High ¤°°°°°°°°°‡‡‡‡‡‡‡›
Mid ¤°°°°°°°°°°°‡‡‡‡‡›
Low ¤°°°°°°°°°°°‡‡‡‡‡›
Test is completed
√Customize choices
ƒVideo mute (ON )
ƒAuto power save (OFF)
ƒRF converter
(ON )
ƒPerfecTape (AUTO)
Go to next page §
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to change
∑ ππADJUST to select