DISPLAY & TECHNOLOGY LIMITED 24G-WR1001NS 사용자 설명서
WR1001NS
15
Step 5 Wireless LAN Setting
For example, here we configure the basic parameters for 2.4GHz wireless network as the
following screenshot:
Band: This filed determines the wireless mode which the Router works on.
2.4GHz (
G) - Select if all of your wireless clients are 802.11a.
2.4GHz (N) - Select if all of your wireless clients are 802.11n.
2.4GHz (
2.4GHz (
G+N) - Select if you are using both 802.11a and 802.11n wireless clients.
Mode: Support AP, Client, WDS and AP+WDS mode.
Network Type: This type is only valid in client mode.
SSID: Service Set Identifier, it identifies your wireless network.
Channel Width: Select the channel width from the drop-down list.
Control Sideband: This relates to the channel number used for your wireless network.
An upper band represents higher channels and vice versa.
Channel Number: Indicates the channel setting for the router.
Enable Mac Clone: Enable or disable MAC clone option. (You can use the "Mac Clone"
button to copy the MAC address of the Ethernet Card installed by your ISP and replace
the WAN MAC address with this MAC address.)
Step 6 Wireless Security Setup
Secure your wireless network by turning on the NONE, the WEP, the WPA(AES), the
WPA2(AES) or WPA2 Mixed etc security feature on the router. This section you can set
the NONE, the WEP, the WPA(AES), the WPA2(AES) or WPA2 Mixed etc security mode.
The following picture shows how to set the NONE security.