MatchX GmbH MX1702 사용자 설명서
12
Chapter 2. Quick Installation Guide
• Determine the place of mount, should be a round pole
• Position the Box to the place, and fasten the stainless steel clamp.
• Position the Box to the place, and fasten the stainless steel clamp.
2.5
Surge protection and Shielded Ethernet cable
It is recommended to use the shielded RJ45 cable to connect the Box, in order to protect the
device from thunder and electricity surge. Both shielded FTP and S-FTP cable from Cat5e are
recommended.
device from thunder and electricity surge. Both shielded FTP and S-FTP cable from Cat5e are
recommended.
2.6
Setup
The Box will be automatically connected to MatchX cloud after the Internet is connected. This guide
will illustrate how to connect to the Box and configure it.
will illustrate how to connect to the Box and configure it.
2.6.1
WiFi connection
Users need to have a laptop or a PC that has WiFi connectivities, then after the Box is powered
on, the SSID that in a format "MatchX_BOX_xxxx" will be available for connection. The default
password is matchxiot. After connected, users can use ssh with terminal or putty in Windows to
login 192.168.8.1, the default password is root. The following picture shows the connection under
Ubuntu.
on, the SSID that in a format "MatchX_BOX_xxxx" will be available for connection. The default
password is matchxiot. After connected, users can use ssh with terminal or putty in Windows to
login 192.168.8.1, the default password is root. The following picture shows the connection under
Ubuntu.
2.6.2
Ethernet connection
In this case users should have connection to LAN by either an Ethernet cable or WiFi, and they
should know the IP address of the BOX in their LAN.
should know the IP address of the BOX in their LAN.