Shenzhen Mossloo Industrial Co. Ltd MSLW198Q 사용자 설명서

Instruction Manual

MSL-W198Q

1 x 6000 mAh Power Bank

1 x 2-in-1 Charging Cable

1 x Instruction Manual

Micro Input: DC 5V 2A

Lightning Input: DC 5V 1A

USB Output 1/2: DC 5V 2A(MAX)

Wireless Input: 5V  0.8A

Wireless Output: 5V 1A

ON/OFF Button: Press once to to view the 

remaining power capacity. LED indicator 

will show Green once the Power bank is on 

wireless charging standby mode.

Charge the power bank fully before usage.

Using the built-in 2-in-1 charging cable, 

AC adapter or USB port of a computer, 

insert the 2-in-1 tip (the side with pins 

upwards) into power bank micro input. 

charging, and will stop once fully charged.

To Wireless Charge the power bank, place 

power bank(6) on a wireless charging surface, 

Connect the 2-in-1 cable to your mobile

phone. 

Android device: The tip with pins upwards; 

iOS device: The tip without pins upwards. 

Connect the other end to the power bank it 

will begin to charge automatically.

Remove the USB cable from your mobile

device when it is fully charged.

Place wireless charging enable device on

Wireless Charging Output Pad(7). The device

begins to charge with LED indicator will turn

RED.

You can fasten your phone on the power bank 

via silicone wrap of the power bank(8) during 

wireless charging.

 

1.

  a.

  b.

  c.

  d.

2.

  

  a.

  

  b.

3.

  a.

b.

   *

  •

  •

  •

  •

  •

  •

 

1.

2.

3.

4.

5.

6.

7.

8. 

LED Indicator

ON/OFF button

Micro Input

Lightning Input

USB port

Wireless Input Pad 

Wireless Output Pad

Silicone Wraps 

MADE IN CHINA

1

2

7

6

5

3

4

can impede the effectiveness of the 

wireless charger, and lead to overheating. 

Please remove attachments from the phone 

before charging on this device.

WARNING-When using this product, basic 

precautions should always be followed:

Read all the instructions before use.

Never store or use this product in 

temperatures below 32°F (0°C) or above 

115°F (45°C). 

Do not overcharge your phone. The 

unit may become hot under excessive 

use.  Remove your phone once it is fully 

charged. Never charge your phone for 

more than 7 hours at a time.

The unit will only achieve full performance 

after 2 or 3 completed charge and 

discharge cycles. 

To reduce the risk of injury, close 

supervision is required when the product is 

used near children. 

Do not expose the device to moisture.

Do not use the device in excess of its 

output rating. Overload outputs above the 

Do not use the device if damaged or 

explosion or risk of injury. 

Do not disassemble the device. For 

professional. Incorrect reassembly may 

or temperatures above 104°F (40°C) may 

result in explosion.

To ensure product safety, ensure that 

identical replacement parts.

Attachments on the back of your phone 

•

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

FCC WARNING

This device complies with part 15 of the FCC Rules. 

Operation is subject to the following two conditions:

 (1) this device may not cause harmful interference, and 

 (2) this device must accept any interference received, 

      including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the 

party responsible for compliance could void the user's authority

to operate the equipment.

NOTE: This equipment has been tested and found to comply with

 the limits for a Class B digital device, pursuant to Part 15 of the 

FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency 

energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio 

communications.However, there is no guarantee that interference 

will not occur in a particular installation.If this equipment does 

cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, 

the user is encouraged to try to correct the interference by one 

or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different

   from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for 

    help.

To maintain compliance with FCC’s RF Exposure guidelines, 

This equipment should be installed and operated with minimum 

20cm distance between the radiator your body: Use only the

supplied antenna

Wireless Charging Power Bank