MODERN ELECTRONICS FACTORY LIMITED ALB428B 사용자 설명서

ICWFV428-2055-01-IB.indd 10

10/05/2018 11:15:33 AM

SETUP

4. Connect to Wi-Fi

To use the clock’s Wi-Fi features, the clock and your mobile device must both be
connected to a Wi-Fi network. The app will guide you through the process, just
follow the on-screen instructions and have your network password ready.

After the initial connection, the speaker will remember the Wi-Fi network and
automatically connect to it when it is in Wi-Fi Mode. If the speaker should become
disconnected or will not connect normally, repeat the steps below.

Initial Wi-Fi Connection

Note: If you have a dual band wireless router, be sure to connect to the 2.4GHz
band, not the 5GHz band.

Note: Please make sure that the WPS indicator is On when Wi-Fi connected.

1. Press the Power button to power on the clock. The Mode/Connection LED

will flash multiple colors after first powering on. This is normal, please
wait for the Mode/Connection LED to begin slowly flashing white, indicating the
speaker is in Wi-Fi Standby Mode.

2. Open the iLive Wi-Fi app on your device and press “Search”, then “Add Device”

(Image A, B, below).