MOKO TECHNOLOGY LIMITED H2 사용자 설명서
Security
•
8 characters password (Lock/Unlock parameters);
•
AES HW encryption.
Low power reminder
•
Led flashes every 10 seconds if the battery capcity is under 5%.
Connection Mode
•
Advertising mode, non-connectable;
•
Configuration mode, connectable.
Custom made mounting
•
Keychain / neck chain;
•
3M sticker.
OTA and DFU
•
Supported upgrade via Over-The-Air;
•
Nordic official Device Firmware Upgrade(DFU);
•
Reserved J-Link port on the board for programming.
5. Turn ON/OFF H2-iBeacon
Turn ON H2-iBeacon:
Press the button (at the side of the device) and keep holding 3 seconds; The red led
flashes several times then turns off, it means that the beacon is on and starts
broadcasting.
Turn OFF H2-iBeacon: Press the button (at the side of the device) and keep
holding 3 seconds; The red led lights on 2 seconds then turns off, it means that the
beacon is off and stops broadcasting.