DashTag A001 사용자 설명서
CLEANING
Use a damp cloth to clean the devices. Do not use harsh chemicals or detergents for cleaning purposes, nor put them in the
washing machine or under abundant water. If your Dash has been used in wet or damp conditions, let it dry naturally in a well
aired place. Do not use heating or drying equipment.
washing machine or under abundant water. If your Dash has been used in wet or damp conditions, let it dry naturally in a well
aired place. Do not use heating or drying equipment.
STORAGE AND TRANSPORT
The Dash should be stored in a cool and dry place, preferably between 10⁰C and 25⁰C (50⁰F and 77⁰F).
Don’t store empty, charge maximum till 80%.
DashTag recommends transporting the Dash using the box it was delivered in to ensure safe transport.
Don’t store empty, charge maximum till 80%.
DashTag recommends transporting the Dash using the box it was delivered in to ensure safe transport.
BATTERY CHARGING
The Dash contains a lithium battery power source. To charge the battery of the Dash connect an Apple iPhone charger.
Check that the contact pins of the USB are dirt-free and clean before connecting it to the USB cable.
The normal operating voltage of the Dash is [+4.5V ; +5.2V] at a maximum of 330mA.. Do not exceed the maximum input
voltage of the Dash of +5.5V under any condition. For safety reasons always use an Apple iPhone charger.
Check that the contact pins of the USB are dirt-free and clean before connecting it to the USB cable.
The normal operating voltage of the Dash is [+4.5V ; +5.2V] at a maximum of 330mA.. Do not exceed the maximum input
voltage of the Dash of +5.5V under any condition. For safety reasons always use an Apple iPhone charger.
BATTERY LIFE TIME
Life time of the Dash and its integrated battery can be optimized if following conditions and advice is adhered.
USAGE
Don’t fully charge or discharge. If possible keep battery between 30% and 80% of their capacity to optimize life time.
Use Apple iPhone AC charger. Don’t use fast chargers. Avoid high temperatures.
Use Apple iPhone AC charger. Don’t use fast chargers. Avoid high temperatures.
RADIO FREQUENCY
The Dash features a Bluetooth low energy transceiver operating at 2.4GHz ISM band.
Frequency:
Frequency:
2400-2483.5 MHz
Max. power output:
-6.3 dBm
OPERATING CONDITIONS
The Dash shall be operated in temperatures between -5⁰C and 40⁰C (23⁰F and 104⁰F). DashTag recommends Store the Dash
at a cool environmental temperature of < 25°C.
at a cool environmental temperature of < 25°C.
DISCLAIMER
The DashTag platform is not created or designed as a medical device. It is critical that you consult your physician, follow all
provided safety and other instructions, and obtain authorization before engaging in any physical exercise with or without
DashTag. The information DashTag gathers and provides should not be relied upon or used as the basis for making
decisions without consulting other sources of information, such as your doctor, physiotherapist or any other physician. For
safety reasons, DashTag recommends only using official DashTag products in combination with official branded USB iPhone
chargers delivered by Apple.
The Dash is assessed against the following requirements:
•
provided safety and other instructions, and obtain authorization before engaging in any physical exercise with or without
DashTag. The information DashTag gathers and provides should not be relied upon or used as the basis for making
decisions without consulting other sources of information, such as your doctor, physiotherapist or any other physician. For
safety reasons, DashTag recommends only using official DashTag products in combination with official branded USB iPhone
chargers delivered by Apple.
The Dash is assessed against the following requirements:
•
EN 300 328 v2.1.1
•
EN 301 489 part 1&17
•
IEC 62368-1:2014
•
IEC 62479:2010
•
FCC part 15.247, 15.207 and 15.209
•
FCC EMC Measurements according to FCC part 15 B
Contains FCC ID: 2AOFF A001
FCC Statement