Shanghai RinLink Intelligent Technology Co. Ltd. G7682 사용자 설명서
G7682 User Manual
Shanghai RinLink Intelligent Technology Co., Ltd.
10
3. Antenna (Default Antenna)
This module has its own antenna, PCB antenna clearance area.
It needs to ensure that the motherboard PCB and other metal devices should be at distance above 15mm,
It needs to ensure that the motherboard PCB and other metal devices should be at distance above 15mm,
while using the PCB antenna on the WIFI module. Copper is forbidden in the shaded part below, where metal
devices, sensors, and other sources of interference caused by signal interference materials should be away from.
PCB module at the bottom of the antenna is suggested to be hollow.
devices, sensors, and other sources of interference caused by signal interference materials should be away from.
PCB module at the bottom of the antenna is suggested to be hollow.
It is recommended that the customer place the module in the following areas of the backboard to reduce the
influence of metal devices on the PCB antenna and wireless signal.
It is recommended that customers place modules in the following areas of the bottom plate to reduce the
impact of metal devices on PCB antennas and wireless signals.