Dongguan Vatro Electronics Technology Co. LTD X3 사용자 설명서
Wireless Charger X3 Instruction
Product Features & Specifications
1. Combination of aluminum alloy and acrylic material, thin to 9.65mm.
2. Intelligent identification of bright light design, automatic identification of charging equipment.
3. In normal temperature and not turn hot when charging.
Material: acrylic board and aluminum alloy
pedestal
pedestal
Input Voltage/Current: 5V/2A 9V/1.7A
Input interface: Lightning
Transmission distance: ≤8MM
Charging efficiency: ≥73%
Dimension: Φ90*9.65mm
Weight: 80g
Using Guide
The product includes wireless charger. When using this product, please connect the USB cable directly to the
wireless charger USB port.
wireless charger USB port.
Connect the adapter to charge
1. Connect the wireless charger to the 5V adapter with USB cable.
2. When Power on, the indicator of wireless charger will shortly flashing and off, the product is under standby
mode.
3. Put the mobile phone with wireless charging function on the wireless charger, when mobile phone is under
charging, then indicator will keep shinning as white .
4. After the mobile phone full charging, the indicator of the wireless charger will off automatically.
5. If the indicator of the wireless charger is under quick flash mode, means the wireless charger is in abnormal
working condition.
( For example: ①The transmitter coil and the receiver coil are not kept in same position;; ②transmitter or
receiver is abnormal etc)
Note: At present, Android and Apple phone support the function of the full charging feedback, the feedback is
like the above, the rest of the phones with full charging while the charging board won’t be prompted
2. When Power on, the indicator of wireless charger will shortly flashing and off, the product is under standby
mode.
3. Put the mobile phone with wireless charging function on the wireless charger, when mobile phone is under
charging, then indicator will keep shinning as white .
4. After the mobile phone full charging, the indicator of the wireless charger will off automatically.
5. If the indicator of the wireless charger is under quick flash mode, means the wireless charger is in abnormal
working condition.
( For example: ①The transmitter coil and the receiver coil are not kept in same position;; ②transmitter or
receiver is abnormal etc)
Note: At present, Android and Apple phone support the function of the full charging feedback, the feedback is
like the above, the rest of the phones with full charging while the charging board won’t be prompted
Mobile phone charging mode
1, Ensure that the wireless charger is connected to the power supply
2, When the wireless charging emitter enters the standby mode, the indicator light flashes off automatically
3. Put the mobile phone with wireless charging function on the wireless charger center, when the mobile phone
2, When the wireless charging emitter enters the standby mode, the indicator light flashes off automatically
3. Put the mobile phone with wireless charging function on the wireless charger center, when the mobile phone