Fiber Mountain Inc SENFG1MA 사용자 설명서
© Copyright 2018, Fiber Mountain, Inc. All Rights Reserved
31
Sensus Installation Manual
150-00006 Rev 5
Figure 5-2: Input New IP Information
5. Navigate to the last page, select the “Set new address” button, and select “Confirm.” The IP
address will now be updated
Figure 5-3: Sensus Set New Address
5.2.2 Changing IP Address from the Craft Port
1. Configuration will be done via CLI craft (RS232) port on the Sensus or via SSH connection
2. Attach serial cable from the front panel CLI craft (RJ-45) port to DB-9 serial port on PC
3. Login with username (default: SysAdmin) and password (default: Password1)
4. To program the Ethernet interface, run the following commands:
2. Attach serial cable from the front panel CLI craft (RJ-45) port to DB-9 serial port on PC
3. Login with username (default: SysAdmin) and password (default: Password1)
4. To program the Ethernet interface, run the following commands:
>cd /
>/fimo_connect/network_config.sh