SIGEYI Technology Co. LTD PM0631 사용자 설명서
DLS Power Meter User Guide
Version 1.2
Brief introduction:
DLS is a pair of power meter module installed on bicycle crank. It can measure the power and
cadence of the left and right side. DLS has dual protocol of ANT+ and Bluetooth, which can easily
link various bike computers and mobile phone APPs. DLS is powered by built-in lithium-ion
battery, which are charged using a dedicated charging cable.
cadence of the left and right side. DLS has dual protocol of ANT+ and Bluetooth, which can easily
link various bike computers and mobile phone APPs. DLS is powered by built-in lithium-ion
battery, which are charged using a dedicated charging cable.
Specifications:
Data: power, cadence , left/right balance
Power measurement accuracy: + / - 2%
Power measurement range: 0~1800W
Cadence measurement range: 30~180RPM
Power measurement accuracy: + / - 2%
Power measurement range: 0~1800W
Cadence measurement range: 30~180RPM
Operational Temperature: - 10 ℃ to 50 ℃
Battery life: 120h
Standby time: More than 1 year
Waterproof Level: IP67
Data protocols: ANT+, BlueTooth4.0
Weight: 50 g
Battery life: 120h
Standby time: More than 1 year
Waterproof Level: IP67
Data protocols: ANT+, BlueTooth4.0
Weight: 50 g
ANT ID
The ANT ID is marked on the power meter modules. Each side has an ANT ID.
Connection
Rotate the crank 1 to 2 cycles to make sure the power meter is waked-up while LED flashes once.
Turn on bike computer, search and connect power meter directly, or input one of the two ANT ID.
Turn on bike computer, search and connect power meter directly, or input one of the two ANT ID.
Working mode:
The DLS consists of power measurement modules on the left and right, which are connected via
wireless communication. The two modules can work together (
wireless communication. The two modules can work together (
Dual side
mode) or independently
(
Single side
mode).
Working mode
LED status
Power data
Dual side
mode
Both LED off
The left and right modules are
awake and connected to each
other.
Power = L_Power +
R_Power
Single side
mode
One side LED on
The two modules are not
connected to each other, or not
a pair.
Power = L_Power*2
Or
Power = R_Power*2
Reversely rotate the crank for more than 5 cycles to switch from single side mode to dual side mode.