Shenzhen NuboMed Technology Co. Ltd. S3000 사용자 설명서
Shenzhen NuboMed Technology Co., Ltd.
Tangtou1stRd.,SkyworthInnovationValley#5,
BuildingC,6F,Shiyan,Baoan,
BuildingC,6F,Shiyan,Baoan,
Shenzhen
Tel:
755-33079022
Fax:0755-36693461Ext806
www.nubomed.com
4
.Troubleshoot
Symptom Analysis Solution
System won’t turn on
System was not used for
extended periods of time,
battery is locked into dormant
mode
extended periods of time,
battery is locked into dormant
mode
Charge the unit for 24 hours
and try again
and try again
System won’t charge
Power plug was not plugged in
properly or was not plugged
into a 220V wall plug
properly or was not plugged
into a 220V wall plug
Unplug the connector or try a
different 220V wall plug
different 220V wall plug
System turned on but shows a
black screen or without signals
LED monitor might be turned
off, or either one of the
power/HDMI/VGA/DVI cables
are not properly connected
off, or either one of the
power/HDMI/VGA/DVI cables
are not properly connected
Turn the LED on by pressing
the power button / reconnect all
the cables
the power button / reconnect all
the cables
Computer won’t boot into the
operating system
System files damaged or lost
Please contact your IT
personnel to reload the system
and or install anti-virus software
personnel to reload the system
and or install anti-virus software
Possible Virus issues
Won’t connect to the wireless
network
Problem with the wireless
network
network
Please contact your IT
personnel to reset or repair the
wireless network
personnel to reset or repair the
wireless network
Wifi Network Card was off
Turn back on the wireless
network hardware
network hardware
Wifi password was incorrect
Please contact your IT
personnel to confirm the
password
personnel to confirm the
password
Network requires a fixed MAC
address or allocate an IP
address or allocate an IP
Please contact your IT
personnel
personnel
Unit height cannot be adjusted
Height adjustment function was
locked
locked
Power lift: please follow the
instruction to disable the
accidental touch feature by
touching the unlock button
Manual Lift: make sure the
adjustment handle was pulled
upwards before lifting or
pushing downwards
instruction to disable the
accidental touch feature by
touching the unlock button
Manual Lift: make sure the
adjustment handle was pulled
upwards before lifting or
pushing downwards
Workstation won’t stay put in
place
Caster lock was not used
Push down the caster lock to
activate
activate
If problem persists, Please contact your IT personnel or NuboMed service personnel
5. Packing List
Name Quantity
Mobile Workstation and accessories
Mobile Workstation and accessories
1 unit
LED Monitor and cables
1 set
User Manual
1 copy
Product Inspection and Warranty Certificate
1 copy
Tools 1
set