Avido LLC KLWIBADOCK 사용자 설명서
NOTES:
●
Only use the supplied AC adapter for recharging WiBa.
For best results, do not plug WiBa
into a computer’s USB port.
●
WiBa power bank can only be recharged wirelessly using the Avido WiBa charging pad. Do not
attempt to place WiBa on a standard Qi wireless charging pad.
attempt to place WiBa on a standard Qi wireless charging pad.
●
Do not plug in a wired device to WiBa while the power bank is recharging. Only a wireless device
and WiBa power bank can charge simultaneously.
and WiBa power bank can charge simultaneously.
●
Do not stack multiple Qi devices on the power bank or charging pad.
●
Charging times will vary based on device and/or current charge levels.
Charging Your Device on the Charging Pad
WiBa’s charging pad is Fast Charge compatible and can wirelessly charge your device directly.
1.
1.
Use the supplied USB Type-C cable and AC adapter. Plug the AC adapter directly into a wall or
surge protector and plug the USB cable into the charging pad input port.
2.
2.
Place the wireless device on the wireless charging pad. Make sure the center of the device is
aligned over the center of the charging base. Charging will begin on contact.
NOTES:
●
Only use the supplied AC adapter.
For best results, do not plug into a computer’s USB port.
●
A Fast Charge compatible device is required to take advantage of up to 10W of wireless power.
Checking WiBa’s Charge Level
Tap the “ON/OFF” button on your WiBa power bank and the status LEDs will indicate its charge level.
Four LEDs indicate that battery is fully charged, while one LED means that it’s almost out of power.
Four LEDs indicate that battery is fully charged, while one LED means that it’s almost out of power.
Optional Metal Plate Installation
- Not Included with Review Units (Under Testing)
In most cases, a stable wireless charge connection can be found at the center of a phone.
1.
Place and hold your Qi-enabled phone on the center of WiBa power bank and very slowly move your
phone until a charging connection is found.
2.
2.
Before adhering the metal plate, take note of the area on the device that receives a charging
connection from WiBa power bank.
3.
3.
Peel the adhesive cover off the metal plate and press firmly onto your phone or inside your case.
4.
Once the metal plate is affixed, place the device onto the WiBa power bank to make it is charging
properly.
NOTES:
●
We strongly recommend first applying the included adhesive film to the back of your Qi device or
phone case before applying the metal plate. This specifically applies to users of iPhone X/8/8
Plus and any device featuring an all glass back.
phone case before applying the metal plate. This specifically applies to users of iPhone X/8/8
Plus and any device featuring an all glass back.
●
We strongly recommend placing the metal plate to the back of your smartphone or, if using a
case, to the outside of the phone case. This will ensure a much stronger hold on WiBa’s power
bank.
case, to the outside of the phone case. This will ensure a much stronger hold on WiBa’s power
bank.
●
Please note, even though the metal plate assists your device in staying attached to WiBa,
excessive movement can cause your phone and WiBa to separate.
excessive movement can cause your phone and WiBa to separate.