Jinan USR IOT Technology Limited IO808 사용자 설명서
USR-IO808-EWR User Manual
Technical Support:
h.usriot.com
Jinan USR IOT Technology Limited
www.usriot.com
15
2.4. Upgrade firmware
User can refer to FAQ
<<Upgrading firmware method of USR-IO808-EWR_V1.0.0>>
.
2.5. Ethernet interface and WiFi
2.5.1. Ethernet interface
USR-IO808-EWR has two Ethernet interface: WAN/LAN interface and LAN interface. WAN/LAN interface
supports switching between WAN/LAN by modifying value of corresponding register. User can configure by setup
software as follow:
supports switching between WAN/LAN by modifying value of corresponding register. User can configure by setup
software as follow:
Figure 19 WAN/LAN switch
2.5.2. WiFi
USR-IO808-EWR supports WiFi function and AP/STA two WiFi modes,
AP mode:
1. Set WiFi mode to 1(AP mode) and AP’SSID/AP’s password, then restart device.
2. After restarting successfully, use PC or mobile to search IO808-EWR and connect.
STA mode:
1. Set WiFi mode to 2(STA mode) and SSID/password of the target AP which user wants to connect IO808-EWR to,
then restart device.
2. After restarting successfully, IO808-EWR will connect to target AP automatically.
AP mode:
1. Set WiFi mode to 1(AP mode) and AP’SSID/AP’s password, then restart device.
2. After restarting successfully, use PC or mobile to search IO808-EWR and connect.
STA mode:
1. Set WiFi mode to 2(STA mode) and SSID/password of the target AP which user wants to connect IO808-EWR to,
then restart device.
2. After restarting successfully, IO808-EWR will connect to target AP automatically.
Figure 20 WiFi mode