TCL Entertainment Solutions Limited TS5000 사용자 설명서
- 10 -
NOTE:
• If the wireless connection fails again, check if there is conflict or strong interference (for example,
• If the wireless connection fails again, check if there is conflict or strong interference (for example,
interference from an electronic device) around your location. Remove these conflicts or strong
interferences and repeat the above procedures.
interferences and repeat the above procedures.
• The subwoofer should be within 6m of the soundbar in an open area.
• If a TV or an external device is connected, the main unit and the subwoofer will switch on
• If a TV or an external device is connected, the main unit and the subwoofer will switch on
automatically when the TV or the external device is switched on.
• If the main unit is not connected with the subwoofer and it is in On mode, the POWER Indicator
will flash. Follow step 1 ~ 4 above to pair the subwoofer to the main unit.
Basic Operation
Standby/ON
• When you first connect the unit to the main socket, the unit will be in STANDBY mode. The POWER
indicator will light up red.
• Press the button on the remote control to switch the main unit ON or OFF.
• Disconnect the main plug from the main socket if you want to switch the unit off completely.
- If a TV or an external device (Only for AUX socket) is connected, the unit will switch on
• Disconnect the main plug from the main socket if you want to switch the unit off completely.
- If a TV or an external device (Only for AUX socket) is connected, the unit will switch on
automatically when the TV or the external device is switched on.
- When the unit has no input signal for over 15 minutes, it will automatically switch to Standby
mode.
Select Modes
Press the
(SOURCE) button on the unit repeatedly or press the AUX, BT (Bluetooth), OPTICAL, USB
buttons on the remote control to select the desired mode.
The indicator light on the front of the main unit will show which mode is currently in use.
The indicator light on the front of the main unit will show which mode is currently in use.
•
Red indicator: In STANDBY mode.
•
Green indicator: In AUX mode.
•
Blue indicator: In Bluetooth mode.
•
Orange indicator: In Optical mode.
•
White indicator: USB mode.
Adjust the Volume
- Press the VOL+ / VOL- buttons on the unit or on the remote control to adjust the volume.
- If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE
- If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE
button again or press the VOL+ / VOL- buttons on the unit or on the remote control to resume
normal listening.
normal listening.
- Note: While adjusting the volume, the status LED indicator will flash quickly. When the volume has
hit maximum/minimum value level, the status LED indicator will flashes once.
Select equalizer (EQ) Effect
While playing, press the NEWS or MOVIE or MUSIC buttons on the remote control to select between
preset equalizers: Movie (recommended for viewing movies), Music (recommended for listening to
music), NEWS (recommended for listening to NEWS).
preset equalizers: Movie (recommended for viewing movies), Music (recommended for listening to
music), NEWS (recommended for listening to NEWS).