Quick-teck Electronics Ltd QK-A026 사용자 설명서
Quark-Elec Manual
https://www.quark-elec.com
1 of 17
2016
V1.0
QK-A026/024 Wireless AIS+GPS Receiver
Features
Two independent receivers monitoring AIS channels (161.975MHz &162.025MHz) and decoding
both channels simultaneously.
Sensitivity up to -106 dBm@30% PER
Up to 45 nautical miles receiving range
USB 2.0 powered (<270mA@5.0V)
NMEA-0183 message output through WiFi, USB and RS422
Built-in GPS to provide positional data
Combines NMEA input (4.8kpbs only), GPS and AIS messages, and outputs as a seamless stream
Up to 45 nautical miles receiving range
USB 2.0 powered (<270mA@5.0V)
NMEA-0183 message output through WiFi, USB and RS422
Built-in GPS to provide positional data
Combines NMEA input (4.8kpbs only), GPS and AIS messages, and outputs as a seamless stream
of data
BNC connector for 50 Ohm VHF antenna
Powered SMA connector for 50 Ohm GPS antenna
Ad Hoc and Station operating modes
The internal WiFi access point connects up to 4 devices simultaneously
Plug & Play connectivity with chart plotters and PCs
Compatible with Windows, Mac, Linux, Android and iOS (Initial Configuration must be completed
Powered SMA connector for 50 Ohm GPS antenna
Ad Hoc and Station operating modes
The internal WiFi access point connects up to 4 devices simultaneously
Plug & Play connectivity with chart plotters and PCs
Compatible with Windows, Mac, Linux, Android and iOS (Initial Configuration must be completed
using Windows software.)
This device connects to NMEA 0183 and is compatible with RS422 output devices. NMEA 0183-
RS232 devices can connect to our device by using the Garmin Bridge (QK-AS03).
This device does not come pre-loaded with map data. We advise using openCPN for map data.
Some iOS apps may charge for map use.
Test model: QK-A026