CE LINK LIMITED 01 사용자 설명서

                                                        Smartball Slim 

4 

 

 

1. Battery 

Installation  

Open the back cover, and put the CR2016 battery into the battery case, the back of battery is 

upwards, close the back cover. 

2.  Remove the battery 

Open the battery cover and remove the CR2016 battery. 

3. Connection 

status  

A) If the product is turned off, long press the product two seconds, enter the power-on status, 

the green light flashes three times. 

B) Click APP "switch" icon. Connect with the device at the first time, need to choose the 

product you used and after that, it will be connected to the device automatically when you click the 
icon. 

C) Once the connection is successful, the light of product glows green once, and the buzzer 

sounds once.   

D) In connected status, press the product each time, the green light will flash once. 

4. Disconnect 

status  

        In connection status, click on the APP "switch" icon, enter the disconnected state, the red light 
flashes three times, and as long as the light flashes each time, the buzzer will alarm once. 

 

5. Shutdown 

status  

In boot mode, long press the product two seconds, enter the shutdown status, the red light 

flashes twice quickly. 

6. Alarm 

status  

In alarm status, double-click on the product, or click "Stop Alarm" button on APP   

Wireless Self-timer   

Enter the APP camera interface, in connected status, click the product, can be photographed. 

7. Bi-directional 

seeking 

Seek for your phone: in connected status, double-click on the product, your phone gets into 
bright screen and enters an alarm status, the alarm sound plays in a loop.