Orion Electric Co Ltd M115A 사용자 설명서

27

The CD receiver has a programmable timer for 
automated playback, and a sleep timer for turning the 
CD receiver off after a specified period.

You can also use the alarm playback function of your 
iPod to initiate timer playback on the CD receiver.

The timer can be used to start AM/FM, CD, iPod/USB, 
or LINE playback at a specified time. You could, for 
example, use a timer to turn on the CD receiver every 
morning, just like a radio alarm clock.

Note:
• If iPod is selected as the input source for the timer 

settings, USB will play if only a USB flash drive is 
connected, and iPod/iPhone/iPad will play if an iPod/
iPhone/iPad is connected.

Note:
• You must set the clock before you can program the 

timer.

• If you don’t operate any buttons for about 5 seconds 

while programming a timer, the procedure will be 
cancelled and the previous display will reappear.

• When the CD receiver is turned on by the timer, 

playback will begin with the most recently received 
station in the case of AM/FM, the first song in the case 
of a CD or iPod (USB), and the current state of the 
connected device in the case of LINE.

• Only one timer can be set.

Prepare the source that you want the timer 
to play.
If you want AM/FM to play, tune to the station you 
want to hear.
If you want a CD to play, insert the disc.
If your iPod/iPhone/iPad is used, switch the 
connection mode to iPod (see page 22). If your 
USB flash drive is used, switch the connection 
mode to USB (see page 26).
If you want to play a device connected to LINE, 
make settings on the connected device so that it 
will start playing when the timer operates.

Press the [TIMER] button repeatedly until 
“Timer XX” appears.
“XX” indicates the source that was last selected for 
timer playback.

q]/[w] buttons to select the 

source, and then press [ENTER].
You can select the following sources:
AM/FM, CD, iPod (USB), LINE.
In the display, “TIMER” and a number indication 
will blink according to the input source you’ve 
selected.
The number will be “1” for AM/FM, “2” for CD, 
“3” for iPod (USB), and “4” for LINE.

q]/[w] buttons to specify the 

q]/[w] buttons to specify the 

q]/[w] buttons to select 

“Timer On,” and then press the [ENTER] 
button.
When a timer is turned on, its TIMER and number 
appears on the display.
If there is no operation for several seconds, the 
setting will be made with the currently-shown 
content.
The display will return to its previous state except 
for “TIMER” and the number of the selected input 
source; the timer is now set.

8] button to set the 

Tip:
• If you decide to cancel during this procedure without 

making timer settings, press the [TIMER] button.

• By pressing the [DISPLAY] button when specifying 

the time, you can switch between 12-hour and 24-hour 
displays.

Note:
• Be sure to set the CD receiver to Standby, otherwise 

the timed operation will not work.
If the timer has been set, timed operation will work 
even if the SLEEP timer caused the CD receiver to 
enter Standby mode.
Once the timer has been turned on, playback will start 
at the same time every day. Be sure to turn off the 
timer before leaving on vacation.

• If the timer turns the power on, the “SLEEP” 

indication will light. If no operation is performed for 
one hour, the CD receiver will automatically enter 
Standby mode. If you perform any operation, the 
“SLEEP” indication will turn off, and the CD receiver 
will continue operating.

E39_CS-355_En_120614.book  27 ページ  ２０１２年６月１４日　木曜日　午後１時４８分

TENTATIVE