Orion Electric Co Ltd M4F2C 사용자 설명서
22
NOTES: • It is recommended that you set the SPEED to
the SP mode on the recording VCR for best
results.
results.
• Unauthorized recording of copyrighted
television programs, films, video tapes and
other materials may infringe on the rights of
copyright owners and violate copyright laws.
other materials may infringe on the rights of
copyright owners and violate copyright laws.
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup is
shown above.
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup is
shown above.
If you connect the VCR to another VCR or camcorder,
you can duplicate a previously recorded tape.
Make all connections before turning on the power.
you can duplicate a previously recorded tape.
Make all connections before turning on the power.
3
Press the REC/OTR button on the recording VCR,
then press the PAUSE button.
then press the PAUSE button.
4
Press the PLAY button on the playback VCR, then
press the PAUSE/STILL button.
press the PAUSE/STILL button.
5
Press the PAUSE/STILL button on both the VCRs
simultaneously to begin the duplicating process.
simultaneously to begin the duplicating process.
DUPLICATING A VIDEO TAPE
LINE 2
1
Load a blank cassette tape with the erase prevention
tab intact into the recording VCR.
Load a previously recorded tape into the playback
VCR or CAMCORDER.
tab intact into the recording VCR.
Load a previously recorded tape into the playback
VCR or CAMCORDER.
2
Press the INPUT SELECT
button to select AUDIO/VIDEO
input position. "LINE2" will
appear on the screen.
button to select AUDIO/VIDEO
input position. "LINE2" will
appear on the screen.
AUDIO/VIDEO Cord (not supplied)
Playback VCR
To VIDEO OUT
To AUDIO OUT
Recording VCR
To VIDEO IN
To AUDIO IN
AUDIO/VIDEO Cord
(not supplied)
To AUDIO IN
To VIDEO IN
Recording VCR
To AV Jack
Playback Camcorder
NOTE: You can also use the rear AUDIO/VIDEO IN
jacks. Select “ LINE1 ” by pressing the INPUT
SELECT button.
SELECT button.
4F11701A P20-BACK
10/16/01, 1:33 PM
22