Motorola Solutions Inc. 99FT5013 사용자 설명서
Prep
aring Y
o
ur Radio for Use
English
4
Attaching the Universal Connector Cover
(Dust Cover)
The universal connector is located on the antenna side of the
radio. It is used to connect MOTOTRBO accessories to the
radio.
radio. It is used to connect MOTOTRBO accessories to the
radio.
Place the universal
connector cover loop over
the attached antenna. Slide
it all the way down to the
base of the antenna.
connector cover loop over
the attached antenna. Slide
it all the way down to the
base of the antenna.
Insert the hooked end of the
cover into the slots above
the universal connector.
Press downward on the
cover to seat the lower tab
properly into the RF
connector.
cover into the slots above
the universal connector.
Press downward on the
cover to seat the lower tab
properly into the RF
connector.
Turn the thumbscrew clockwise to secure the connector cover
to the radio.
to the radio.
To remove the universal connector cover, press down on the
cover and turn the thumbscrew counterclockwise. Lift the cover
up, slide the connector cover loop upwards, and remove it from
the attached antenna.
cover and turn the thumbscrew counterclockwise. Lift the cover
up, slide the connector cover loop upwards, and remove it from
the attached antenna.
Replace the universal connector cover when the connector is
not in use.
not in use.
Powering Up the Radio
Rotate the On/Off/Volume
Control Knob clockwise
until you hear a click. You
see Motorola and
MOTOTRBO (TM) on the
radio’s display momentarily.
Control Knob clockwise
until you hear a click. You
see Motorola and
MOTOTRBO (TM) on the
radio’s display momentarily.
The LED blinks green and
the Home screen lights up if
the backlight setting is set
to turn on automatically.
the Home screen lights up if
the backlight setting is set
to turn on automatically.
NOTE: The Home screen does not light up during a power-up
if the LED indicator is disabled (see Turning the LED
Indicator On or Off on page 46).
Indicator On or Off on page 46).
A brief tone sounds, indicating that the power-up test is
successful.
successful.
NOTE: There is no power-up tone if the radio tones/alerts
function is disabled (see Turning the Radio Tones/
Alerts On or Off on page 45).
Alerts On or Off on page 45).
If your radio does not power up, check your battery. Make sure
that it is charged and properly attached. If your radio still does
not power up, contact your dealer or system administrator.
that it is charged and properly attached. If your radio still does
not power up, contact your dealer or system administrator.
Universal
Connector
Cover
(Dust Cover)
Connector
Cover
(Dust Cover)
LED
Indicator
Indicator