Motorola Solutions Inc. 99FT5013 사용자 설명서

This feature gives your radio priority access on a channel.

NOTE: The radio operates in the normal dispatch manner 

while in Emergency Call, except, if enabled, it returns 
to one of the following:

Tactical/Non-Revert – You talk on the channel you 
selected before you entered the emergency state.

Non-Tactical/Revert – You talk on a programmed 
emergency channel. The emergency alarm is sent 

on this same channel.

Press the programmed Emergency button.

The display shows Emergency on the second line. The LED 
lights up solid green and the Emergency icon appears on 
the Home screen display.
OR
The radio sounds a low-pitched tone, if the selected channel 
does not support emergency. Select a channel that shows 
Emergency.

Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from 
your mouth.

Press and hold the PTT button. Speak clearly into the 
microphone.

Release the PTT button to end the transmission and wait for 
a response from the dispatcher.

Press and hold the programmed Emergency button for 
about a second to exit the Emergency Call mode.

This feature allows you to send an Emergency Alarm, a non-
voice signal, which triggers an alert indication on another radio. 

Press the programmed Emergency button.

The display shows Sending Alarm on the second line. The 
LED lights up solid green and the Emergency icon appears 
on the Home screen display. An Emergency Enter Tone 
sounds upon each retry.