Panasonic Corporation of North America RPWF6000 사용자 설명서

RQT8948

10

11

RQT8948

    Select the DTS audio signal on the connected equipment.

    ●  A DTS compatible DVD player is necessary to play DVD discs recorded in DTS. (Refer to your DVD player’s 

operating instructions for further details.)

    ●  If “OFF” has been selected for the DVD player’s DTS digital setting, sound may not be output even when DTS 

output is selected in the DVD menu.

    ●  When connecting a DVD player and this unit with an analog connection, sound may not be output. Change to 

a digital connection if this happens.

    ●  There may be some noise emitted during functions such as rewinding and fast forwarding with a DTS format 

DVD. This does not indicate a problem with the unit.

Use the audio cable (stereo mini plug to 2-pin plug) or similar to connect the transmitter’s LINE IN terminal to a 

stereo mini headphone jack on the television or portable AV equipment. 

Use an audio cable when connecting the AUDIO OUT terminals of a video cassette player, television etc. to the 

transmitter’s LINE IN (L/R) terminal.

     When the sound is low with an analog connection, switch the ATT (attenuator) control on the Transmitter’s rear 

panel to [0 dB].

     The radio waves have a maximum range of 30 m (98.4 ft.) from the transmitter.

     The most appropriate frequency is automatically set when the headphones are taken off the transmitter. When 

the  headphones  are  used  outside  the  range  of  the  radio  waves  or  the  radio  waves  weaken,  the  sound  is 

broken. Move nearer to the transmitter or reset the frequency (

 page 14 [Setting the most appropriate 

frequency]).

    ●  Since  this  unit  is  using  the  2.4  GHz  radio  frequency  band,  obstacles  (such  as  reinforced  concrete  walls 

and  metal  doors)  may  cause  the  sound  to  be  broken.  This  is  a  characteristic  of  radio  waves  and  not  a 

malfunction.

    ●  The sound heard from the headphones will differ depending on where the transmitter is placed and the kind 

of location in which it is used. We recommend placing the transmitter where the sound is received best.

    ●  The sound may be broken when the unit is used at the same time as other equipment that uses the 2.4 GHz 

radio frequency band such as wireless equipment or microwaves.

    Avoid placing the unit in the following locations

      -  Places with high temperatures such as near heating appliances or places directly exposed to sunlight

      -  Places with a lot of dust

      -  On top of unstable carts or inclined surfaces

      -  Places with excessive vibration

      -  Bathrooms and other moisture-prone places

This unit uses radio waves to transmit the signals so it is recommended to use the headphones within the range 

of the radio waves.

●  Reduce the volume before switching the ATT control.

●  If the analog sound input is distorted (there may also be noise), switch 

the ATT control to [-8 dB].

AUDIO-L

(L, white)

AUDIO-R

(R, red)

AUDIO-L

(L, white)

AUDIO-R

(R, red)

0 dB

Equipment with a low output level such as televisions and 

portable equipment

-8 dB

Other equipment (setting at shipment)

Selecting  fine  audio  equipment  such  as  the  unit 

you’ve just purchased is only the start of your musical 

enjoyment.  Now  it’s  time  to  consider  how  you  can 

maximize  the  fun  and  excitement  your  equipment 

offers. This manufacturer and the Electronic Industries 

Association’s  Consumer  Electronics  Group  want  you 

to get the most out of your equipment by playing it at 

a  safe  level.  One  that  lets  the  sound  come  through 

loud and clear without annoying blaring or distortion-

and, most importantly, without affecting your sensitive 

hearing.

We recommend that you avoid prolonged exposure to 

excessive noise.

Sound  can  be  deceiving.  Over  time  your  hearing 

“comfort level” adapts to higher volumes of sound. So 

what sounds “normal” can actually be loud and harmful 

to your hearing.

Guard against this by setting your equipment at a safe 

level BEFORE your hearing adapts.

To establish a safe level:

● Start your volume control at a low setting.

●  Slowly  increase  the  sound  until  you  can  hear  it 

comfortably and clearly, and without distortion.

Once  you  have  established  a  comfortable  sound 

level:

● Set the dial and leave it there.

Taking  a  minute  to  do  this  now  will  help  to  prevent 

hearing damage or loss in the future. After all, we want 

you listening for a lifetime.