Panasonic Corporation of North America 927128AHP 사용자 설명서
4
Remote Control
LSSQ0204
Batteries
2 “AA”
RF Coaxial Cable
VJAS0196
Accessories
Battery replacement caution
• Do not mix old and new batteries.
• Do not mix alkaline with manganese batteries.
• Do not mix old and new batteries.
• Do not mix alkaline with manganese batteries.
3) Close the cover.
Loading the Batteries
Congratulations
on your purchase of one of the most sophisticated and
reliable products on the market today. Used properly,
it will bring you and your family years of enjoyment.
Please fill in the information below. The serial number
is on the tag located on the back of your VCR.
reliable products on the market today. Used properly,
it will bring you and your family years of enjoyment.
Please fill in the information below. The serial number
is on the tag located on the back of your VCR.
• Date of Purchase
• Dealer Purchased From
• Dealer Address
• Dealer Phone No.
• Model No.
• Serial No.
• Dealer Purchased From
• Dealer Address
• Dealer Phone No.
• Model No.
• Serial No.
Before Using
Basic Connection
1) Open the cover.
2) Insert the
batteries as
marked.
marked.
V
R
+
Connect VCR and TV with an AV Cable (not supplied) or a
RF Coaxial Cable (supplied) as shown in the figure below.
RF Coaxial Cable (supplied) as shown in the figure below.
If your TV has AUDIO and VIDEO IN terminals, connect
them to VCR for higher quality picture and sound.
You can enjoy stereo sound even if your TV is not stereo
by connecting a stereo amplifier to the VCR.
them to VCR for higher quality picture and sound.
You can enjoy stereo sound even if your TV is not stereo
by connecting a stereo amplifier to the VCR.
INDOOR ANTENNA
OUTDOOR ANTENNA
CABLE TV
or
ANTENNA
(See page 5)
WARNING
When using “Nut type” RF coaxial cables, tighten with fingers
only. Overtightening may damage terminals.
When using “Nut type” RF coaxial cables, tighten with fingers
only. Overtightening may damage terminals.
IN
VHF/
UHF
UHF
VIDEO
AUDIO
R
L
OUT
TV
IN FROM ANT.
OUT TO TV
AUDIO
IN 1
OUT
MONO
VCR
a) AV CABLE
(not supplied)
VHF/UHF
R
L
VIDEO
b) RF
COAXIAL
CABLE
CABLE
Notes
1) While connection b) (above) is sufficient, connection
a) offers better sound and picture (especially with
this model , you can enjoy Hi-Fi STEREO sound).
this model , you can enjoy Hi-Fi STEREO sound).
2) For both connections a) and b) proceed as follows:
• To use VCR : VCR Power on, set TV to VIDEO.
• To watch TV : VCR Power off, select channel on.
• To watch TV : VCR Power off, select channel on.
3) Set VCR Output to channel 3 or 4 (not an active
station). (See page 6.)
Use the L Audio OUT jack when connecting to a
monaural TV.
Use the L Audio OUT jack when connecting to a
monaural TV.
Connect VCR
to TV with RF
Coaxial Cable.
to TV with RF
Coaxial Cable.
2
Disconnect antenna
or cable from TV and
connect to VCR.
or cable from TV and
connect to VCR.
1
Power Plug Adaptor
VJSS0070
Caution:
• Voltage 110V, 220V and 240V are not for use in USA.
• Operation at a voltage higher than 120V AC may require the use of a different AC plug. Please contact either a
• Voltage 110V, 220V and 240V are not for use in USA.
• Operation at a voltage higher than 120V AC may require the use of a different AC plug. Please contact either a
local or foreign Panasonic Distributor Center for assistance in selecting an alternate plug.
NV-FJ4620PX P01-06.p65
00/02/29, 0:34
4