Panasonic Corporation of North America 927128AHP 사용자 설명서

다운로드
페이지 11
41
Digital Auto Picture
Automatically controls the video output signal for
less noise depending on the tape condition.
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control (to reduce picture
noise)
Use during Playback and Slow Motion mode to reduce
picture noise. Press CH (TRACKING)   /   buttons on
the remote control or on the VCR until the picture clears
up. To return to Auto Tracking, press POWER off, then
on again a few seconds later.
V-Lock Control (to reduce picture jitter)
In Still mode, CH (TRACKING)   /   buttons operate as
a V-Lock control.
Power Source:
110/120/220 V
AC Auto, 50/60 Hz
Power Consumption:
Power On
Approx. 23 watts
Power Off
Approx. 3.3 watts
Video Signal:
EIA Standard NTSC color
Video Recording System: 4 rotary heads helical
scanning system
Audio Track:
1 track (Normal)
2 channel (Hi-Fi Audio Sound)
Tuner: For USA
TV Tuners:
VHF input ch2~ch13
Cable channels “A”~“EEE”,
“A-5”~“A-1”,  “5A”, 65~94,
100~125
UHF input ch14~ch69
For EUROPE
TV Tuners:
VHF input ch2~ch13 (USA)
UHF input ch21~ch62 (C.C.I.R.)
Broadcast Channels:
VHF 2~13, UHF 14~69
CABLE Channels:
Midband A through I (14~22)
Superband J through W (23~36)
Hyperband AA~EEE (37~64)
Lowband A-5~A-1 (95~99)
Special CABLE channel 5 A
(01)
Ultraband 65~94, 100~125
Operating Temperature: 5 °C~40 °C (41 °F~104 °F)
Operating Humidity:
10 %~75 %
Weight:
3.4 k
C (7.4 lbs.)
Dimensions:
430 (W) x 98 (H) x 250 (D) mm
16-15/16” (W) x 3-7/8” (H) x
9-3/4” (D)
Video Head Clog Sensor
During playback this
screen appears if
clogging is detected.
To remove screen,
press PLAY on the
remote or VCR.
• Use “dry” type head cleaning cassette only.
(Part No. NV-TCL30PT is recommended.)
Playing older or damaged tapes may eventually
cause video heads to become clogged.
Specifications
Head Cleaning
• Follow cleaning tape instructions carefully.
Excessive use of tape can shorten head life.
• If head clog symptoms persist, contact your
nearest Factory Service Center or authorized
Service Center. (See page 45.)
Use a soft cloth or dusting attachment of
your vacuum cleaner to dust your VCR.
Remove dust from the ventilation holes on
the back sides and bottom of the cabinet.
Plastic surfaces are easily scratched and
can be marred by alcohol and various
solvents. Avoid excessive use of oil-based
furniture polishes since the materials used
in the cabinet will accumulate more dust.
We recommend using a nonabrasive,
antistatic cleaner and polisher.
Cleaning the VCR
Note: Designs and specifications are subject to change
without notice.
VCR & Cassette Information
V I DEO  HEADS  MAY
NEED  CLEAN I NG
PLEASE   I NSERT  HEAD
CLEAN I NG  CASSETTE
OR  REFER  TO  MANUAL
END : PLAY  KEY
PLAY
STOP/EJECT
REC
REW
FF
POWER
VCR/TV
VIDEO IN 2     L-AUDIO IN 2-R
/
ACTION
CHANNEL
Cleaning Tape
Features for a Quality Picture
R
R
R
R
R
R
R
R
A clean video head helps produce a clear
picture.
So, we have equipped your VCR with a built-
in, non-chemical head cleaning system that
helps prevent clogging of the video heads.
Cleaning is performed each time you load or
unload a video cassette.
Built-in Head Cleaner
• This feature is preventative only, If your video
heads are seriously clogged, consider the use
of a chemical non-abrasive head cleaning kit or
take your VCR to a Service Center.
NV-FJ4620PX P40-43.p65
00/02/29, 0:40
41