Panasonic Corporation of North America 96NKX-HNZ108 사용자 설명서
Installation/Registering the range
repeater to the hub
repeater to the hub
Once the unit is connected to a power outlet in step 3, it automatically
goes into registration mode (if not already registered).
goes into registration mode (if not already registered).
1
Range repeater: Connect the AC adaptor.
R Use only the supplied Panasonic AC adaptor PQLV219.
R Use only the supplied Panasonic AC adaptor PQLV219.
Press plug firmly.
Hook
2
Hub: Press and hold M
OTHER DEVICEN for about 5 seconds.
R Depending on the hub, a registration tone sounds.
R If all registered handsets start ringing, press the same button to
R If all registered handsets start ringing, press the same button to
stop. Then repeat this step.
R The next step must be completed within 90 seconds.
3
Range repeater: Connect the AC adaptor to a power outlet.
(120 V AC, 60 Hz)
R When the unit is turned on, the STATUS indicator and indicator
light amber for about 2 seconds.
4
Range repeater: Confirm that the STATUS indicator and
indicator light green. (The unit is ready for use.)
R If the indicators do not light green, re-position the unit in a place
indicator light green. (The unit is ready for use.)
R If the indicators do not light green, re-position the unit in a place
where the indicators light green.
5
Hub: To exit registration mode, press M
OTHER DEVICEN.
12
Setup
HNH200_for_US_en-CA_(en_en)_0426_ver.003.pdf 12
2016/04/26 13:54:34