SANYO Electric Co. Ltd. CPE-310-230 사용자 설명서
Before beginning the installation, familiarize yourself with the top
and side panels of the indoor unit.
and side panels of the indoor unit.
The lights on the top panel tell you when the SOMAport is ready.
Off
The SOMAport is not receiving power.
Amber
The SOMAport is booting and running its
internal
diagnostics.
Flashing amber
The SOMAport is upgrading its software.
Green
The SOMAport is powered and operating
normally.
Red
An error occurred. The SOMAport is not currently
functional.
Off
The SOMAport is not receiving power.
Amber
The SOMAport is attempting to locate a base station.
Flashing amber
The SOMAport cannot locate a base station.
Flashing green
The SOMAport has located a base station and is
attempting to establish a connection.
Green
The SOMAport has located a base station and has
established a connection.
Red
An error occurred. The SOMAport is not currently
functional.
Status Light
Network Light
When setting up the SOMAport, follow these guidelines:
Do not connect any third-party devices to the indoor unit,
CAT5 cable, or outdoor unit.
Do not use the outdoor unit indoors. It must be mounted on
a permanent outdoor structure.
1
Insert the connector of the power cord that is attached to
the power supply into the power jack on the indoor unit.
2
Insert the socket end of the AC power cord into the power
supply.
3
Position and orient the SOMAport in the location in which you
plan
on
keeping
it.
4
Insert the plug end of the AC power cord into a power outlet.
The SOMAport takes up to five minutes to start, connect to your service
provider’s network, and acquire a radio signal. The light on the power
supply indicates whether or not it is receiving power. Wait until the
Network light on the top of the SOMAport turns green before you
begin connecting equipment to the SOMAport.
provider’s network, and acquire a radio signal. The light on the power
supply indicates whether or not it is receiving power. Wait until the
Network light on the top of the SOMAport turns green before you
begin connecting equipment to the SOMAport.
The Outdoor SOMAport consists of two parts: an outdoor unit and an
indoor unit.
indoor unit.
After installing the SOMAport, simply plug-in the indoor unit and
connect it to your computer using the provided Ethernet cable. The
SOMAport will automatically connect your service provider and you
can setup your account using a Web browser.
connect it to your computer using the provided Ethernet cable. The
SOMAport will automatically connect your service provider and you
can setup your account using a Web browser.
If you are using your SOMAport to provide telephone service, you can
connect ordinary telephones to it.
connect ordinary telephones to it.
The Ethernet cable is supplied with the SOMAport. If your computer
has an Ethernet port, use the Ethernet cable.
has an Ethernet port, use the Ethernet cable.
If your computer does not have an Ethernet port, you will need to
purchase an Ethernet card or an Ethernet-to-USB adapter.
purchase an Ethernet card or an Ethernet-to-USB adapter.
Copyright 2005 SOMA Netowrks, Inc. All Rights Reserved.
SOMA, SOMA Networks and the star-and-circle design are trademarks or registered trademarks of SOMA Networks, All of SOMA Netwoks’ product names are trademarks of SOMA Netowrks, Inc. All other company and product names may be trademarks or registered trademarks of their respective owners.
Products and services of SOMA Networks, Inc. may be protected by one or more pending or issued U.S. or foreign patents.
Part 006218 revision 01
Before pluggin in the SOMAport, make sure that the CAT5 cable from
the outdoor unit has been inserted to the ODU/IF port on the side of
the indoor unit.
the outdoor unit has been inserted to the ODU/IF port on the side of
the indoor unit.