ICOM 263300 사용자 설명서
37
5
MEMORY OPERATION
New2001
■ Transferring bank contents
[
Contents of programmed memory banks can be cleared or
transferred to another bank.
transferred to another bank.
INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
cleared, the memory channel contents still remain pro-
grammed.
q Select the desired bank contents to be transferred or
erased.
➥ Push [M/CALL•PRIO] several times to select memory
➥ Push [M/CALL•PRIO] several times to select memory
mode.
➥ Push [BAND] then rotate [DIAL] to select the desired
memory bank.
• Bank initial blinks.
➥ Push [BAND] to select the bank then rotate [DIAL] to se-
lect the desired contents.
• Bank initial stops blinking.
w Push [SET•LOCK].
e Push [SET•LOCK] or [S.MW•MW] several times until
“BAK” appears.
• The bank initial for the selected memory channel is displayed.
r Rotate [DIAL] to select the desired bank initial to transfer
or erase.
• Select “-- --” indication when erasing the contents from the bank.
r Push [V/MHz•PRIO] to set the bank and exit set mode.
t Repeat steps q to r for transferring or erasing an an-
t Repeat steps q to r for transferring or erasing an an-
other banks contents.
z Select the desired bank contents in the main
band.
➥ Push [MR/CALL] to select memory mode.
➥ Push [MR/CALL] to select memory mode.
➥ Push [FUNC], [
MONI
1(BANK)] then select
the desired memory bank via [Y]/[Z].
➥ Push [
CLR
A(MW)] to select the bank then
select the desired contents via [Y]/[Z].
x Push [
SET
B(D-OFF)] to enter set mode.
c Push [
SET
B(D-OFF)] or [
ENT
C(T-OFF)] several
times until “BAK” appears.
v Push [Y]/[Z] to select the desired bank initial to
transfer or erase.
• Select “-- --” indication when erasing the contents
from the bank.
v Push [
CLR
A(MW)] to set the bank and exit set
mode.
b Repeat steps z to v for transferring or eras-
ing an another banks contents.
BANK
[Y]/[Z]
SET
MAIN
T X
M
IC-208H.qxd 03.2.26 20:00 Page 37 (1,1)