ICOM 269700 사용자 설명서
8
SET MODE
38
Beep tone
Beep
Scan mode
Scan Mode
Weather alert
WX Alert
Scan resume timer
Scan Timer
Attenuation level
Attenuation
Level
Level
Internal speaker
Internal
Speaker
Speaker
Scrambler code*
Scrambler
Code
Code
Scrambler type*
Scrambler
Type
Type
Dual/tri watch
DUAL/TRI
DSC watch
DSC Watch
LCD contrast
LCD
Contrast
Contrast
Automatic acknowledgement
AUTO ACK
Push
9
16
* The scrambler set items
are only available when a
scrambler unit is installed.
scrambler unit is installed.
Push
when using HM-127
DSC Watch, Internal Speaker
and AUTO ACK items are not selectable
when using HM-127.
■ Set mode programming
Set mode is used to change the conditions of the trans-
ceiver’s functions: scan mode (Normal or Priority), scan re-
sume timer, weather alert, Dualwatch/Tri-watch selection,
DSC watch, transceiver’s beep tone (transceiver or HM-127),
internal speaker, LCD contrast (transceiver or HM-127), RF
attenuation level, scrambler code, scrambler type and auto-
matic acknowledgement.
ceiver’s functions: scan mode (Normal or Priority), scan re-
sume timer, weather alert, Dualwatch/Tri-watch selection,
DSC watch, transceiver’s beep tone (transceiver or HM-127),
internal speaker, LCD contrast (transceiver or HM-127), RF
attenuation level, scrambler code, scrambler type and auto-
matic acknowledgement.
•
Available functions may differ depending on dealer set-
ting.
ting.
•
The optional HM-127 has it’s own settings for the beep
tone and LCD contrast.
tone and LCD contrast.
q Turn power OFF.
w While pushing
w While pushing
[
[
9
9
]
], turn power ON to enter Set mode.
e After the display appears, release
[
[
9
9
]
].
r Push
[
[
9
9
]
] to select the desired item.
Or push
[
[
]
]
(
(
9
9
)
)
on the HM-127 to select the item when
using an optional HM-127.
t Rotate
[
[
CHANNEL
CHANNEL
]
] to select the desired condition of the
item. Use
[
[
Y
Y
Y
Y
]
]/
[
[
Z
Z
Z
Z
]
] when using an optional HM-127.
y Turn power OFF, then turn ON again to exit Set mode.
16
16
16
16
16
16
16
16
• SET MODE CONSTRUCTION