ICOM 269700 사용자 설명서

y ATTENUATOR/INTERCOM/SCRAMBLER KEY

➥Toggles the Attenuator function ON or OFF when

pushed momentarily. (p. 8)

• “LOCAL” appears when the Attenuator is in use. The order of

indication precedence is “SP OFF,” “LOCAL” and “CALL.”

➥Activates an optional Intercom function when pushed for

1 sec. (p. 36)

➥Calls optional HM-127 

REMOTE-CONTROL MICROPHONE

when pushed and held while in Intercom mode. (p. 36)

➥While pushing 

], activates an optional Voice

scrambler function. (p. 10)

• The optional Voice scrambler function cannot be used on

Channel 16 and 70.

u CHANNEL 16/CALL CHANNEL KEY

➥Selects Channel 16 when pushed. (p. 6)
➥Selects call channel when pushed for 1 sec. (p. 6)

• “CALL” appears when call channel is selected. “SP  OFF”

and “LOCAL” indications have priority.

➥Push for 3 sec. to enter call channel programming con-

dition when call channel is selected. (p. 9)

➥While pushing 

], enters channel comments pro-

gramming condition. (p. 9)

➥Enters Set mode when pushed while turning power ON.

(p. 38)

i DISTRESS KEY

Transmits Distress call when pushed for 5 sec. (p. 18)

o CHANNEL/DUALWATCH/TRI-WATCH KEY

➥Selects and toggles the regular channels and weather

channel when pushed momentarily. (p. 7)

➥While pushing 

], selects one of 3 regular chan-

nels in sequence when pushed. (p. 7)

• International, U.S.A. and Canadian channels are available for

regular channels.

➥Starts Dualwatch or Tri-watch when pushed for 1 sec. 

(p. 11)

➥Stops Dualwatch or Tri-watch when either is activated.

!0 SCAN KEY

(p. 13)

➥Starts and stops Normal or Priority scan when tag

(scanned) channels are programmed.

➥Push 

for 1 sec. to set or cancel the dis-

played channel as a tag (scanned) channel. 

➥While pushing 

], push for 3 sec. to clear or set

all tag channels.

!1 DSC/POSITION KEY

➥Selects the DSC menu when pushed. (p. 14)
➥Shows current position and time from a GPS receiver,

etc. when pushed for 1 sec. (p. 17)

PANEL DESCRIPTION

3

2