ICOM 269800 사용자 설명서

36

6

CALL CHANNEL OPERATION

■ Programming a call channel

Operating frequency, duplex information, subaudible tone in-
formation (tone encoder or tone squelch ON/OFF and its fre-
quency) and alphanumeric channel names can also be
programmed into the call channel.

q Set the desired frequency in VFO mode.

➥ Push [V/MHz

] to select VFO mode.

➥ Set the frequency using [DIAL].

➥ Set other data as desired.

w Push [S.MW

] momentarily.

e Rotate [DIAL] to select the call channel

• “M” indicator and “C” blink.

r Push [S.MW

] for 1 sec. to program.

• 3 beeps sound and the unit returns to VFO mode automatically.

z Set the desired frequency in VFO mode.

➥ Push [VFO/LOCK] to select VFO mode.

➥ Set the frequency.

➥ Set other data as desired.

x Push [FUNC], then [

A(MW)] momentarily.

c Select the call channel via [Y

Y] or [Z

Z].

v Push [FUNC] then [

A(MW)] for 1 sec. to

program.

• 3 beeps sound and the unit returns to VFO mode

automatically.

MR/CALL

MW

[Y]/[Z]

[EXAMPLE]: Programming 145.120 MHz into the call channel via the microphone.

Beep

Beep

Beep

“

“

“

“

“

Push          then          for 1 sec.  

➠

Set the frequency.

Push         to select VFO mode.

Push       , then        momentarily.

Push          until large “C” appears.