ICOM 269800 사용자 설명서

44

8

PRIORITY WATCH

■ Priority watch operation

q Select VFO mode; then, set an operating frequency.
w Set the watching channel(s).

For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push [V/MHz

] for

1 sec. to start memory scan.
For call channel watch:
Select the call channel by pushing [M/CALL

] once

or twice.

e Push [M/CALL

] for 1 sec. to start the watch.

• The transceiver checks the memory or call channel every 5 sec.
• The watch resumes according to the selected scan resume con-

dition. (p. 42)

• While the watch is pausing, pushing 

resumes

the watch manually.

r Push [M/CALL

] to stop the watch.

z Select VFO mode; then, set an operating fre-

quency.

x Set the watching channel(s).

For memory channel watch:
Push [MR/CALL] then [Y

Y] or [Z

Z] to select the

desired memory channel.
For memory scan watch:
Push [MR/CALL], then push [

2] to start the

memory scan.
For call channel watch:
Push  [MR/CALL] for 1 sec. to select the call
channel.

c Push [

3(PTT-M)] to start the watch.

• The transceiver checks the memory or call channel

every 5 sec.

• The watch resumes according to the selected scan re-

sume condition. (p. 42)

• To resume the watch manually when paused, push

3(PTT-M)] or [

A(MW)].

v To stop the watch, push [

A(MW)].

PRIO

3

While pausing or receiving 
a signal on the memory or 
call channel, “PRIO” blinks.