ICOM 269800 사용자 설명서

60

12

OTHER FUNCTIONS

D

D Offset frequency

Sets the duplex offset frequency within 0 to 20 MHz range.
During duplex (repeater) operation, transmit frequency (or re-
ceive when reverse function is set to ON) shifts the set fre-
quency. (default value may differ depending on versions)

D

D Reverse mode

Sets the reverse function ON and OFF (default).

D

D Tuning step

Selects tuning step from 5 (default), 10, 12.5, 15, 20, 25, 30
and 50 kHz for [DIAL] or [Y]/[Z] operation. 

D

D Scan resume timer

Selects scan resume timer from SCT-15 (default), SCT-10,
SCT-5 and SCP-2. 

• SCT-15/10/5

: Scan pauses for 15/10/5 sec., then re-

sumes.

• SCP-2

: Pause on a signal until signal disap-

pears, then resumes 2 sec. after the sig-
nal disappears.

D

D Transmit permission

Turns transmission permission ON and OFF. This function
can be set for each memory, call channel and VFO, indepen-
dently.

Transmission is permitted. 
(default)

Transmission is inhibited.

Reverse function OFF (default)

Reverse function ON