ICOM 269900 사용자 설명서

27

6

MEMORY CHANNELS

■ Memory bank setting

The IC-R20 has a total of 26 banks 

(A to Z)

. Regular memory

channels, 000 to 999, are assigned into the desired bank for
easy memory management.

q Push [MR S.MW] for 1 sec. to select the select memory

write condition.

• 1 short and 1 long beep sound.
• “

µ ” indicator blinks.

w Rotate [R-DIAL] to select the desired memory channel.
e While pushing [8 SET], rotate [R-DIAL] to select “BANK”

item.

• “BANK” item can also be selected by pushing [8 SET] several

times.

• Bank group and channel number is displayed if the selected

memory channel has already been assigned into a bank, the
previous.

r While pushing [BAND], rotate [R-DIAL] to select the de-

sired bank group from “A” to “Z.”

• The bank group can also be selected by pushing [BAND] sev-

eral times.

t After releasing [BAND], rotate [R-DIAL] to select the bank

channel number from “00” to “99.”

• Vacant bank channel numbers are only be displayed.

y Push [MR S.MW] for 1 sec. to set the channel into the

bank.

• Return to the previous indication.

-

BNAME:

FM

>BANK

-

:A-00

012

µ

.

146.010

Bank channel is selected with [R-DIAL]

-

BNAME:

FM

>BANK

-

:A-00

012

µ

.

146.010

Bank group is selected with 

FM

>

CLEAR

-

SKIP

-

:OFF

-

MNAME:

-BNAME:

-

BANK

-

:----

012

µ

.

146.010

FM

>BANK

-

:----

012

µ

.

146.010

is pushed

After

[R-DIAL]

SET TS:5.0kHz

√

MODE

ANL

AFC

TSQL

FM

PSKIP

-DUP