ICOM 269900 사용자 설명서
38
7
SCAN OPERATION
■ Auto-memory write scan
This scan is useful for searching a specified frequency range
and automatically storing busy frequencies into memory
channels. The auto-memory write scan is performed any VFO
scan types (ALL, BAND, PROG).
and automatically storing busy frequencies into memory
channels. The auto-memory write scan is performed any VFO
scan types (ALL, BAND, PROG).
q Select VFO mode with [VFO MHz].
w Push and hold [MODE SCAN] to enter scanning type se-
w Push and hold [MODE SCAN] to enter scanning type se-
lection condition.
e Rotate [R-DIAL] to select the desired scanning type.
• “ALL” for full scan; “BAND” for band scan, “PROG-xx” for pro-
grammed scan (xx= 0 to 24; programmed scan edges numbers
only displayed)
only displayed)
r Release [MODE SCAN] to start the scan.
t Push [MR S.MW] to turn the automatic memory write func-
t Push [MR S.MW] to turn the automatic memory write func-
tion ON and OFF.
• “
µ ” indicator blinks.
yPush [DUALWATCH] to stop the scan.
D
D During auto-memory write scanning:
• When signal is received, scan pauses and the frequency is
• When signal is received, scan pauses and the frequency is
stored into auto-memory write channel group (
å 000–199).
- 2 short beeps sound when stored.
• Scan resumes after frequency storing.
• When all channels are stored, the scan is canceled auto-
• When all channels are stored, the scan is canceled auto-
matically and 1 long beep sounds.
D
D Recalling the stored frequencies:
q Push [MR S.MW] several times to select the auto-memory
q Push [MR S.MW] several times to select the auto-memory
write channel group.
• “
å
” appears.
e Rotate [R-DIAL] to select the desired channel.
D
D Clearing the stored frequencies:
q Select the auto-memory write channel group.
w Push [5 SKIP] for 1 sec. to clear the all channels contents.
q Select the auto-memory write channel group.
w Push [5 SKIP] for 1 sec. to clear the all channels contents.
• 1 short and 1 long beeps sound.
NOTE: The auto-memory write channel contents CANNOT
be cleared by an independent channel. Thus it is good idea
to copy the contents into regular memory channel.
be cleared by an independent channel. Thus it is good idea
to copy the contents into regular memory channel.
√
å
MODE
ANL
AFC
TSQL
FM
439 875
PSKIP
-DUP
001
“
å
”
appears when auto memory
write channel group is selected.
√
µ
MODE
ANL
AFC
TSQL
FM
14
8 800
PSKIP
-DUP
001
• During auto memory
write scan
write scan
“ ” indicator blinks during
auto memory write scan.
auto memory write scan.
[R-DIAL]
MODE
SCAN
MR
S.MW
µ
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16