ICOM 269900 사용자 설명서

61

11

OTHER FUNCTIONS

D

D Weather channel selection

q Push [MR S.MW] several times to select the weather chan-

nel group.

w Rotate [R-DIAL] to select the desired weather channel. 

r Push [VFO MHz] to return to VFO mode, or push [MR

S.MW] to select other mode to exit the weather channel.

D

D Weather alert function

NOAA broadcast stations transmit weather alert tones before
important weather announcements. When the weather alert
function is turned ON, the selected weather channel is moni-
tored each 5 sec. for the announcement. When the alert signal
is detected, the “ALT” and the “WX” indications are displayed
alternately and sounds a beep tone until the receiver is oper-
ated. The previously selected (used) weather channel is
checked periodically during standby or while scanning.

q Select the desired weather channel.
w Turn the weather alert function ON in set mode.

➥ Push [8 SET] for 1 sec. to enter set mode.

➥ Rotate [R-DIAL] to select “WX ALERT” item, then push

[8 SET]. Rotate [R-DIAL] to select “ON.”

➥ Push [DUALWATCH] to exit set mode.

e Set the desired stand-by condition.

• Select VFO or memory channel.
• Scan or priority watch operation can also be selected.

r When the alert is detected, a beep sounds and the follow-

ing indication will be displayed.

t Turn the weather alert function OFF in set mode.

√

MODE

ANL

AFC

TSQL

FM

PSKIP

-DUP

WX

√

MODE

ANL

AFC

TSQL

FM

PSKIP

-DUP

ALT

Show above indications alternately.

√

MODE

ANL

AFC

TSQL

FM

PSKIP

-DUP

WX

Weather channel indication

[R-DIAL]

■ Weather channel operation