ICOM 287900 사용자 설명서

■

When using the tuning dial to change the frequency, or when
a scan function is activated, the frequency changes in incre-
ments determined by the set tuning step. This can be
changed if desired.

The following tuning step are available.

• 0.01 kHz (10 Hz)

• 0.02 kHz (20 Hz)

• 0.05 kHz (50 Hz)

• 0.1 kHz (100 Hz)

• 0.5 kHz (500 Hz)

• 1 kHz

• 2.5 kHz

• 5 kHz

• 6.25 kHz

• 8.33 kHz

• 9 kHz

• 10 kHz

• 12.5 kHz

• 15 kHz

• 20 kHz

• 25 kHz

• 30 kHz

• 50 kHz

• 100 kHz

• 125 kHz

• 150 kHz

• 200 kHz

• 500 kHz

• 1000 kHz (1 MHz)

q

Push the desired band’s [MAIN] to select the main band.

• Push the same band’s [VFO/MR•S.MW] to select VFO mode, if

necessary.

w

Push and hold [MHz•TS] for 1 sec. to enter tuning step se-
lect mode.

e

Rotate the same band’s [DIAL] to select the desired tun-
ing step.

r

Push [MHz•TS] to exit set mode.

• Or push the same band’s any other keys or common keys (below

the  dusplay) to exit tuning step select mode.

[DIAL] 

[MHz•TS] 

10

3

SETTING A FREQUENCY