ICOM 287900 사용자 설명서
20
5
MEMORY OPERATION
5
■
Programming a memory channel
[EXAMPLE]: Programming 145.800 MHz into memory channel 20 (blank channel).
Push
Rotate for setting frequency, etc.
Push for 1 sec.
Rotate
Push for 1 sec. and continue to push
➠
Beep
“
Beep
Beep
Beep
“
“
“
“
“
Beep
Beep
“
“
S.MW
VFO/MR
S.MW
VFO/MR
S.MW
VFO/MR
Release
S.MW
VFO/MR
VFO settings, including the set mode contents such as sub-
audible tone frequency, offset, scan skip information can be
programmed into a memory channel.
audible tone frequency, offset, scan skip information can be
programmed into a memory channel.
q
Set the desired frequency in the desired band (left or right).
➥
Push the desired band’s [VFO/MR•S.MW] once or twice
to select VFO mode.
to select VFO mode.
➥
Set the frequency using the same band’s [DIAL].
➥
Set other data (e.g. tone frequency, duplex information,
etc.) if required.
etc.) if required.
w
Push and hold the same band’s [VFO/MR•S.MW] for
1 sec. to enter select memory write mode.
1 sec. to enter select memory write mode.
• “
!
” indicator and the memory channel number blink.
e
Rotate [DIAL] to select the memory channel to be pro-
grammed.
grammed.
• Memory channels not yet programmed are blank.
r
Push and hold [VFO/MR•S.MW] for 1 sec. to program.
• 3 beeps sound
• Memory channel number automatically increases when contin-
• Memory channel number automatically increases when contin-
uing to push [VFO/MR•S.MW] after programming.
✔
CONVENIENT
Memory programming can be performed in versatile ways
e.g. memory channel to the same (or different) memory chan-
nel, etc.
e.g. memory channel to the same (or different) memory chan-
nel, etc.