ICOM 287900 사용자 설명서
5
MEMORY OPERATION
26
5
■
Memory bank setting
[
The IC-R2500 has a total of 21 banks (A to H, J to R, T, U,
W, Y). Regular memory channels, 0 to 999, may assigned
into the desired bank for easy memory management.
W, Y). Regular memory channels, 0 to 999, may assigned
into the desired bank for easy memory management.
q
Select the desired memory channel.
➥
Push [VFO/MR•S.MW] to select memory mode in the
main band, then rotate the same band’s [DIAL] to se-
lect the desired memory channel.
main band, then rotate the same band’s [DIAL] to se-
lect the desired memory channel.
• “
!
” and memory channel number appear.
w
Push and hold the same band’s [VFO/MR•S.MW] for 1
sec. to enter select memory write mode.
sec. to enter select memory write mode.
• “
!
” indicator and the memory channel number blink.
e
Push [SET•SKIP] once to select “bAnk.”
r
Rotate [DIAL] to select the desired bank and bank chan-
nel.
nel.
• Push [ATT•PRIO] to toggle the bank or bank channel selection.
• Banks A to H, J to R, T, U, W and Y are available.
• Vacant bank channel numbers are only be displayed.
• Banks A to H, J to R, T, U, W and Y are available.
• Vacant bank channel numbers are only be displayed.
t
Push and hold [VFO/MR•S.MW] for 1 sec. to program the
bank and exit select memory write mode.
bank and exit select memory write mode.
Bank selection
Bank channel selection
After [SET•SKIP]
released
released
[SET•SKIP]
[DIAL]
[ATT•PRIO]
[VFO/MR•S.MW]