ICOM 287900 사용자 설명서
43
9
SET MODE
D
D
VSC setting
Turns VSC (Voice Squelch Control) function ON and OFF.
(default: OFF)
D
D
Scan resume timer
Selects scan resume timer from SCT-15 (default), SCT-10,
SCT-5 and SCP-2. Scan resumes after the specified period
when the received signal disappears.
SCT-5 and SCP-2. Scan resumes after the specified period
when the received signal disappears.
• SCT-15/10/5
: Scan pauses for 15/10/5 sec. when the
received signal disappears.
• SCP-2
: Scan pauses on a signal until signal dis-
appears, then resumes 2 sec. after the
signal disappears.
signal disappears.
D
D
Program scan skip setting
Sets the program scan skip setting ON and OFF for VFO
scan operation, such as programmed scan.
scan operation, such as programmed scan.
(default: ON)
This item appears when set mode is accessed from VFO
mode only.
mode only.
D
D
Scan skip area setting
Sets the pre-programmed scan skip area setting ON and OFF
for VFO scan operation, such as programmed scan.
This item appears only when the scan skip area setting is pro-
grammed by the clone ((p. 44)) and set mode is accessed
from VFO mode.
for VFO scan operation, such as programmed scan.
This item appears only when the scan skip area setting is pro-
grammed by the clone ((p. 44)) and set mode is accessed
from VFO mode.
D
D
Memory name setting
Sets memory name setting from ON (appear) and OFF (not
appear; default) for memory name appearance.
This item appears when set mode is accessed from memory
mode only.
appear; default) for memory name appearance.
This item appears when set mode is accessed from memory
mode only.