ICOM 289300 사용자 설명서

■

  Prior to using the transceiver for the first time, the battery 

pack must be fully charged for optimum life and operation. 
(p. 18)

q

 Rotate [VOL] to turn the power ON.

w

  If the transceiver is programmed for a start up password, 

input the digit codes as directed by your dealer.

 

•  10-keypad can be used for password input depending on 

version.

 

•  The keys in the table below can be used for password input.

 

•  The transceiver detects numbers in the same block as identical.  

Therefore “01234” and “56789” are the same.

0
5

4
9

3
8

2
7

1
6

e

  When the “PASSWORD” indication does not clear after 

inputting 6 digits, the input code number may be incorrect. 
Turn the power off and start over in this case.

D Battery type selection

The battery type must be selected according to the attaching 
battery type when tuning the transceiver ON.

➥

  While pushing and holding [Emer] and [PTT], rotate [VOL] 

to toggle the attaching battery type.

  •  After the display appears, release [Emer] and [PTT].
  • “ DRY BATT” is displayed for about 3 sec. then “Lo” (low power 

indicator) appears when the battery case operation is selected.

  •  “LI-ION” is displayed for about 3 sec. when the Lithium-ion bat-

tery operation is selected.

•  This operation may not be available depending on the pre-setting. 

Ask your dealer for details.

3

11