ICOM 289300 사용자 설명서

26

7

■

Turn the transceiver power 
OFF  while  connecting  the 
HM-169/170GP.

Speaker

Belt clip

Microphone

TOP KEY
(for HM-170GP only)
Desired functions can 
be  programmed  by 
your dealer.

GPS ANTENNA
(for HM-170GP only)

PTT SWITCH
Push and hold to 
transmit;
release to receive.

This illustration is desicribed with HM-170GP.

NEVER immerse the connector in water. If the connector 
becomes wet, be sure to dry it BEFORE attaching it to the 
transceiver.

NOTE: The microphone is located at the top of the 

speaker-microphone, as shown in the diagram above. To 
maximize the readability of your transmitted signal (voice), 
hold the microphone approx. 5 to 10 cm (2 to 4 inches) 
from your mouth, and speak in a normal voice level.

■

Attach the connector of the speaker-microphone into the 
multi connector on the transceiver and tighten the screw.

CAUTION:  Attach  the 
multi connector snugly, but 
do not overtighten.
A loose connection will al-
low water intrusion into the 
connector;  an  overtight-
ened  connector  will  dam-
age  the  connector  pins  in 
the transceiver.

IMPORTANT: KEEP the connector cover attached to the 
transceiver when the speaker-microphone is not in use. 
(p. 3)
Water will not get into the transceiver even if the cover is 
not attached, however, the terminals (pins) will become 
rusty, or the transceiver will function abnormally if the 
connector becomes wet.